Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, Evaluación del desgaste de las herramientas de corte y acabado superficial en el fresado del acero inoxidable AISI 304 y acero AISI 1018 utilizando lubricación híbrida (nanofluidos +CO2)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-01) ;Llumitasig Tubón, Wilmer Alexander ;Núñez Núñez, Diego FernandoOcaña Guzmán, Adriel SantiagoThe present project focused on the analysis of the effect of the hybrid lubrication method and a Minimum Quantity Lubricant (MQL) system together with Titanium Dioxide and Alumina nanoparticles on the milling process of AISI 1018 and AISI 304 steels, cutting tool flank wear and surface finish, which will be carried out on a CNC milling machine. In this analysis hard metal inserts with PVD TiAlN coating were used, cutting speed is the variable parameter, the recommended and maximum values by the manufacturer were used to establish the experimental combinations, for the hybrid lubrication methods two types of nanoparticles were used, Titanium Dioxide and Alumina for AISI 1018 and AISI 304 steels respectively at a concentration of 0. 5 percent by weight; using a combination of liquid and gaseous CO2 together with the system of minimum amount of lubricant directed to the contact zone of the work material and cutting tool to minimize the friction and temperatures generated in the cutting process. For the evaluation of flank wear and roughness, standard instruments such as the scanning electron microscope, based on the ISO 8688-1 standard specialized in this type of evaluations, and a roughness meter for the measurement of surface quality Ra and Rz were used. After analysis of the results, the surface finish of the steels was improved and the service life of the cutting tools was increased.Item type:Ítem, Adición de micro-nano burbujas de aire al agua de amasado y su influencia en las propiedades mecánicas del hormigón(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09) ;Tipantasig López, Erick RodrigoFrías Torres, Alex XavierThe industry is currently developing additives that improve the properties of concrete, introducing today a segment known as nano-additives, which work by directly altering the microstructures that are generated in the cement mixture, thus granting different mechanical properties. as aesthetic. The most important objective is to evaluate the influence of adding micro-nano air bubbles to the mixing water on the mechanical properties of concrete in the hardened state. To achieve this, an analysis of the materials used was carried out in the laboratory, obtaining their physical-chemical and physical-mechanical properties, as appropriate, in order to design the concrete mixture with them, then using a multiphase pump, micro -nano bubbles of air to the water to then mix together with the stone materials and cement, obtaining a concrete with less workability than that without the addition of said nanoparticles, then experimental and control cylindrical specimens were made that were tested at different ages, in compression simple and indirect traction. Results were obtained that showed that the addition of micro-nano air bubbles to the mixing water of the concrete gives us an increase in the mechanical properties of this compound in a percentage of 15.9 and 17.7 for resistance to simple compression and traction, respectively. With which it was concluded that, by adding this type of nanoparticles to the composition of the concrete, it improved its behavior when subjected to compressive and tensile stresses.Item type:Ítem, Diseño y construcción de un homogeneizador por inmersión de alto cizallamiento para los laboratorios de la Carrera de Ingeniería Mecánica de la Facultad de Ingeniería Civil y Mecánica de la Universidad Técnica de Ambato(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2021-04) ;Baño Chancusig, Carlos Emilio ;Siza Ramírez, Cristian IvánNúñez Núñez, Diego FernandoThis technical paper was focus on the design and construction of a high shear immersion homogenizer, which was carried out due to the importance of the implementation of creating a tool like this. This facilitates the mixing, emulsion and homogenization of substances all related to the creation of nanofluids. In fact, the homogenizer was created for The Technical University of Ambato with particular reference to the Mechanical Engineering career. Furthermore, construction and functional tests were carried out. While for the design several technical characteristics were taken like (materials, dimensions, mechanisms, use. Etc.). This device is made up by a three-phase motor, a pulley mechanism, a tollined structure, a rotating shaft, a turbine, a work head, a lifting mechanism with 3D printing jaws and an electronic system that helps us to operate it. On the other hand, construction took into account materials available in the market, and of course verifying each of the construction processes. Lastly, functional and experimental tests were performed in order to confirm operation process and homogenization of substances with a main goal which is to create a nanofluid at different times. To ensure effective operation and durability of the device, an operating manual was prepared. It indicates the way to proceed while it is being use, extending the useful life of the device
