Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Optimización del proceso para la obtención de muestras de superficie plana, empleadas en el análisis metalográfico para el laboratorio de materiales de la Facultad de Ingeniería Civil y Mecánica de la Universidad Técnica de Ambato(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-26) ;Peñaloza Duarte Jhon Alexander ;Vaca Ortega Wilson HenryUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería MecánicaThe present research describes the study of the process for obtaining samples for metallographic analysis within the Materials Laboratory of the Technical University of Ambato. The study focuses on comparing two specimens of the same material to analyze the reliability of incorporating a sanding unit into the university’s facilities. For the development of the research, technical criteria on sizing and usefulness were applied to optimize the use of sanding belts for the sanding process in the field of metallography. The study mainly concentrates on this area due to the amount of time required by the current process before completing it with a polishing stage to achieve a good surface finish. As a solution, it was determined that carbon steel AISI 1018 steel is suitable due to its commercial availability and its stable structural behavior without alterations during testing. Additionally, it is an appropriate material for verifying parameters such as temperature, uniformity, and flatness. The beneficiaries of this innovation will be the Faculty of Civil and Mechanical Engineering, especially mechanical engineering students interested in the study of sanding and/or polishing metallographic specimens. The proposed sanding belt machine ensured a reduction in sanding time without causing any notable alteration in the steel’s microstructure.Item type:Ítem, Modelo de material para perfiles conformado en frío de sección transversal UV de acero a36, para espesores de 10 mm y 12 mm(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-02) ;Caiza Llumitasig, Edisson Dario ;Pullutasig Chuquisala, David AndrésPeña Jordán, Francisco AgustínThe material model obtained for cold-formed UV cross-section profiles of ASTM A36 steel, for thicknesses of 10 mm and 12 mm, is presented as a versatile and efficient structural solution. This model has been developed considering its mechanical properties and its usefulness in the construction industry due to its resistance and ease of forming. To analyze the impact of the mechanical properties in the cross section of the profile obtained, three types of tests were carried out. In the tensile test, the ASTM E8 standard was applied, evaluating its mechanical properties, taking into account the tensile strength, elastic limit and modulus of elasticity in the specimens of the different sections (wings, back, curves) of the profile. Using the ASTM E10 standard, the hardness test was carried out on specimens extracted for each thickness, determining their hardness in the virgin material and in the cross section of the UV profile. Using the ASTM E-112 standard, the metallographic test was applied, obtaining micrographic photographs of the grains of the virgin material and the affectation in the cross section of the UV profile. As a result, the mechanical tests carried out show a comprehensive view of the mechanical properties in the cross section of the UV profile, highlighting a greater rigidity in the 12 mm profile and a greater impact on the mechanical properties in the curved sections of the profile, reaching maximum stresses. tensile strength of 551.5 MPa and 554.21 MPa for thicknesses of 10 mm and 12 mm.
