Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 8 de 8
  • Item type:Ítem,
    Análisis comparativo de la resistencia mecánica de hormigones reforzados con fibra de vidrio y polipropileno
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03)
    Lara Erazo José Eduardo
    ;
    Medina Robalino Wilson Santiago
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    Concrete is one of the most widely used construction materials in the world; however, its low tensile strength and tendency to crack represent technical limitations that have driven the study of reinforcement alternatives. This experimental study analyzes the mechanical behavior of concrete with a compressive strength of f'c = 210 kg/cm² reinforced with type E glass fiber and polypropylene fiber, both at 0.5% of the mix volume, in the canton of Ambato, province of Tungurahua. The research was structured in three phases. The first phase involved the physical characterization of the aggregates and mix design using the ACI 211.1 method. The second phase consisted of the preparation and testing of cylindrical specimens and beams, evaluating compressive strength, flexural strength, and indirect tensile strength. The third phase included a comparative unit cost analysis for the three mix designs. The results at 28 days showed that in compressive strength, the control mix reached 226.64 kg/cm², glass fiber reached 222.82 kg/cm², and polypropylene fiber reached 178.25 kg/cm², the latter being the only mix that did not meet the design f'c. In flexural strength, polypropylene fiber achieved the highest value at 37.15 kg/cm² (24.00% above the control), while glass fiber reached 33.21 kg/cm² (10.85% above the control). In indirect tensile strength, polypropylene fiber recorded 20.18 kg/cm² and glass fiber 18.88 kg/cm², both exceeding the control mix value of 17.07 kg/cm². The economic analysis established production costs of $121.95/m³ for the control mix, $150.14/m³ with glass fiber, and $176.79/m³ with polypropylene fiber. It is concluded that glass fiber at 0.5% is the most technically and economically viable alternative, as it is the only mix design that meets the design compressive strength and simultaneously improves both flexural and indirect tensile mechanical properties.
  • Item type:Ítem,
    Análisis del comportamiento del hormigón asfáltico mezclado con fibra de vidrio, utilizando el ensayo Marshall
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-01)
    Bonilla Bravo, Erick Nicolás
    ;
    Moreira Cedeño, Fricson Lutgardo
    The widespread use of traditional asphalt concrete over time has revealed deterioration in roads due to vehicular traffic, weather conditions, and a lack of maintenance. Recognizing this, efforts have been made to improve with innovative techniques and new materials to achieve greater strength, durability, cost reduction, and shorter maintenance times on roads. In this study, a sample was obtained from the Salvador quarry, and a series of tests were conducted on the aggregates to determine their suitability for the development of asphalt briquettes. These tests included particle size distribution, specific gravity of fine aggregates, specific gravity of coarse aggregates, and abrasion or wear of coarse aggregates. Fiberglass was incorporated into the asphalt mixture using the Marshall methodology, and the optimum asphalt content was determined by preparing three briquettes for each of the percentages: 5.00, 5.50, 6.00, 6.50, and 7.00 percent, resulting in an optimal content of 6.45 percent. Similarly, to establish the optimum percentage of fiberglass, the results obtained for percentages of 5.00, 7.50, 10.00, 15.00, and 25.00 percent were compared, with 5.00 percent yielding the best characteristics and properties. Upon completing all phases of the research, it is concluded that fiberglass asphalt concrete exhibits 11.05 percent less stability than traditional asphalt concrete. However, all its other properties meet Marshall criteria, except for asphalt-filled voids, which exceed them by 5.50 percent.
  • Item type:Ítem,
    Optimización de respuestas múltiples (DOE/MSR) de propiedades mecánicas del material hibrido de matriz epoxi reforzada con fibra sintética (vidrio) y natural (chambira)
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2022-01)
    Chuquitarco Taco, Santiago Wladimir
    ;
    Paredes Salinas, Juan Gilberto
    The experimental work was carried out based on analysis of the results of mechanical properties of the hybrid material with reinforcements of chambira fiber and glass with epoxy resin matrix, formed by vacuum stratification, cured in different temperatures and subjected by laser cutting with CO2 of the samples. The use of Response Surface Methodology with Box-Behnken design allowed the entry of three continuous factors with their levels respectively are: Orientation 1, Orientation 2 of the fiber between -45, 0 and 45 degrees and Curing temperature with 60, 90 and 120 degrees Celsius. In the design, the number of treatments to be obtained was specified so that the mechanical tests of each sample were elaborated, the data obtained were organized and validated with the fulfillment of the parametric assumptions having full reliability in analysis of the mechanical properties. With the results obtained, the optimal configuration of the mechanical properties was determined, which are presented in factors with the orientation 1 to 28.68 degrees, orientation 2 to 1.36 degrees and at a curing temperature of 120 degrees Celsius. These values were given by means of the analysis of variance ANOVA the same that has significance and reliability in its data, therefore, the model of the Surface Design DOE / MSR explains up to 99.6 percent of its variability of the properties in that way the global desirability has the value of 0.6373.
  • Item type:Ítem,
    Proceso tecnológico para la fabricación de materiales compuestos con matriz polimérica y refuerzo de fibra de vidrio para su uso en filamento de impresión 3D
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Mecánica Mención Manufactura, 2021)
    Villegas Suárez, Edmundo Sebastián
    ;
    Espín Lagos, Segundo Manuel
    The present research work was focused on determining the best configuration of the polymeric matrix of recycled PET plastic and glass fiber reinforcement, for the manufacture of a new polymeric composite material intended for the extrusion of filament for 3D printing; For the analysis several aspects were determined such as the feasibility of extrusion of the composite material, the nozzle diameters of the extruder and 3D printer, the feasibility and processing of the raw material such as shredded recycled PET and later pelletized, in addition to the fiberglass in different configurations and redesign and implementation of the extruder machine. Using these considerations, the results of the diameter of the filaments obtained in each configuration and volumetric composition were analyzed, and the best option was determined by means of a T-student statistical analysis; with the result obtained from the analysis, the mechanical properties of the material were determined. The results of this research showed that the optimal configuration with filament for 3D printing is 90 percent recycled PET plus 10 percent glass fiber powder, and this is the most feasible for the extrusion of the filament since it fits the diameter of the nozzle of the 3D printer; at the same time, the mechanical properties of this new material were determined.
  • Item type:Ítem,
    Caracterización mecánica de un material compuesto de resina poliéster reforzado con fibra de vidrio y malla de acero para determinar las propiedades mecánicas
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2021-07)
    Alomaliza Masaquiza, Darwin Iván
    ;
    Vaca Ortega, Wilson Henry
    In this work, an experimental investigation of a composite material for the determination of the mechanical properties made up of polyester resin reinforced with fiberglass and steel mesh was carried out. In this composite material, the steel mesh reinforcement has 2 different types such as: galvanized steel mesh and stainless steel mesh, the number of fiberglass layers was varied, the preparation of the test pieces was carried out by compression stratification with a mold Constructed of A36 steel material. In this research the purpose is to find the best configuration that provides high mechanical properties, the specimens are tested and manufactured according to ASTM standards, for tensile testing the ASTM D3039 standard was implemented, in the bending tests the ASTM D7264 standard and test to impact according to ASTM D5628. After being tested the specimens, tabulated and collected the data. The configuration that presents the best results is that of 2 layers of fiberglass, 1 layer of stainless steel mesh cured at 25 degrees centigrade in the environment, made with compression stratification, resulting in a maximum tensile stress of 64.01 (MPa), maximum bending stress of 145.85 (MPa) and mean failure energy of 0,910 (J).
  • Item type:Ítem,
    Análisis estadístico con metodología de superficies de respuesta para la optimización de las propiedades mecánicas a tracción, flexión e impacto del material híbrido de matriz epóxica, reforzada con fibra de vidrio y abacá
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020-10)
    Cunalata Caiza, César Marcelo
    ;
    Paredes Salinas, Juan Gilberto
    In the present experimental work, the analysis of the mechanical properties of the hybrid composite material was carried out, which is reinforced by natural abaca fibers arranged in a flat weave and fiberglass in a thermostable epoxy resin polymer matrix This material was vacuum molded and subsequently subjected to a CO2 laser cut. In the work, a Response Surface Methodology MSR with a Box-Behnken design is proposed which establishes that the minimum of input factors to consider is three and for each factor three levels, which are: Orientation of the tissue of natural fiber: 0, 45, 90 sexagesimal degrees, Fiberglass thickness: 0, 1, 2 mm, and the Curing temperature: 20, 50, 80 degrees Celsius, With this configuration, the design suggests a specific number of treatments with different configurations of factors and levels, from which data will be obtained after the execution of the destructive tests, data that will be validated with the fulfillment of parametric assumptions, thus guaranteeing high reliability throughout the statistical analysis process, consequently the variability ANOVA of the data provided by the MSR design was examined, specifying the significant effects and their incidence on the mechanical properties, later the analysis is complemented with the optimization of each mechanical property analyzed through the desirability function. The results of this investigation determined that the optimal configuration of the factors to take advantage of the mechanical properties is: Orientation of the natural fiber 0 degrees, Thickness of fiberglass 0.76 mm and a Curing temperature of 42.42 degrees Celsius, the regression model of the MSR design explains up to 96,69 per cent the variability of the properties, with an Overall Desirability value of 0,7931.
  • Item type:Ítem,
    Optimización (Doe-Mezclas) del material híbrido con refuerzos de fibra de abacá, fibra de cabuya y fibra de vidrio de matriz de resina poliéster y su incidencia sobre las propiedades mecánicas a flexión, tracción e impacto
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020-08)
    Chiluiza Toapanta, William Patricio
    ;
    Paredes Salinas, Juan Gilberto
    It posed develop this investigation with the purpose of avoid ignorance in the design of Experiments with mixtures, this is applied to the Mechanical Engineering in the field of composite materials to be able optimize and determinate the best characteristics of the material. The method applied is the design of experiments with mixtures (DOE) the compound of fiberglass, Abaca and Cabuya with the matrix resin polyester applied for the simplexlattice design to determine the optimum mix. It determined a total of ten treatments, and each one forms the one hundred percent of the compound is formed, of which were made 150 specimens to tensile, flexion and impact test with the application of the standards of the ASTM 3039, ASTM 7264 and ASTM 5628 respectively. The results were analyzed to comply the assumptions of normality, equality of variance and waste independence otherwise the data were transformed to adjust the data to BoxCox. The previously analyzed data is passed to Minitab to optimize and determine the best volumetric fraction, finding a percentage of 20.07 for fiberglass, while natural fibers have a percentage of 4.85 percent for Abaca and Cabuya fiber of 5.08 percent. In addition, with the 70 percent Polyester Resin as constant this completes 100 percent of the material composite mix. With this combination it gets better mechanical properties to Traction, Flexion and Impact.
  • Item type:Ítem,
    Optimización (Doe-Mezclas) del material híbrido con refuerzos de fibra de abacá, fibra de cabuya y fibra de vidrio de matriz de resina epóxica y su incidencia sobre las propiedades mecánicas a flexión, tracción e impacto
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020-08)
    Torres Mesias, David Esteban
    ;
    Paredes Salinas, Juan Gilberto
    The following experimental work was aimed at finding new combinations of composite materials conformed of fiberglass (VF), abaca fiber (FA) and cabuya fiber (FC) with epoxy matrix. For this it was used different volumetric mixtures of reinforcements, the same ones that were considered as input parameters in the statistical analysis of mixtures to optimize the mechanical properties of the results of the different treatments. Specimens were made by compression stratification to then test them and obtain data generated by the Tensile tests (ASTM D3039 / D3039M-08), Flexural (ASTM D7264 / D7264M-07), and Impact (ASTM D5628-10, FE geometry), and thus treat them under parametric assumptions developing a reliable analysis. Once the data was established, it was analyzed by means of the design of mixtures; from which, the significance of the p - value located in the mixture regression table was verified, which was inferred for the generation of the optimization of the responses of the mixtures using the minitab software. In experimental work it was possible to establish the volumetric fractions that generated the best mechanical properties of the mixture; fiberglass 0.261 percent, abaca fiber 0.003 percent, cabuya fiber 0.036 percent and epoxy matrix 0.7 percent, fulfilling the foundation of a mixture of always being equal to one.