Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Análisis experimental de la estabilización de suelos arenosos del sector La Libertad de Huachi Grande mediante la adición de cal, cemento y ceniza de totora: evaluación de propiedades físicas y mecánicas y su aplicación en infraestructura vial(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Altamirano Villacís Katherin Ibeth ;Acosta Lozada Rodrigo IvánUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis research evaluates the effect of adding totora reeds as an alternative stabilizer for improving sandy soil intended for road subgrades and compares its performance with the results of stabilization using lime and cement. The study arises from the need to develop sustainable alternatives that overcome dependence on conventional materials and evaluate innovative and environmentally responsible solutions with a construction approach that allows for the development of more efficient infrastructure aligned with environmental sustainability criteria. The experimental work was developed based on the physical and mechanical characterization of the soil in the La Libertad sector of the Huachi Grande parish. It was determined that the soil corresponds to a poorly graded sand (SP) according to the Unified Soil Classification System (USCS) and to a granular material type A-3 according to the American Association of State Highway and Transportation Resources (AASHTO) system. Regarding the mechanical properties, a CBR of 14.40% was obtained, classifying it as a fair subgrade. Subsequently, the physical and mechanical properties of the soils were evaluated with additions of 5%, 10%, and 15% lime, cement, and cattail ash. The results showed that all three stabilizers improved the soil's bearing capacity, reaching a maximum CBR value of 240.00% with the 15% cement addition, while lime reached a maximum value of 62.40% with a 10% dosage. Cattail ash achieved a maximum CBR of 24.10% with a 10% ash content. Finally, the technical and economic feasibility analysis concluded that totora ash is the best alternative for stabilizing the subgrade of sandy soils, since according to the CBR value it is determined to be a very good subgrade, while stabilization with lime and cement results in a good and very good base, which are considered oversized for the established objective of stabilizing the subgrade, and the cost is high compared to that of stabilization with totora ash.Item type:Ítem, Correlación entre las propiedades físico-mecánicas del mortero de cemento Portland y el mortero de cal estabilizado con almidón de arroz(2020) ;Pico Sánchez, Víctor AlejandroPortilla Yandún, Favio PaúlThis paper investigates the incidence of rice starch applied to a lime mortar, in addition to replicating the process used in the construction of the Chinese wall, dosing a mortar that accomplish the specifications of “O” type glue mortar of 24 Kilograms per square centimeter at 28 days. For that reason the dosage of three types of mortars was carried out: normal lime mortar (1:2 dosage) MNC 1:2, lime mortar stabilized with sticky rice (1:2 dosage) MCEA 1:2 and cement mortar (dosage 1:5) MCP 1:5. The partial replacement of rice starch in the volume of water of the mash is crucial to determine the optimum percentage of rice starch to be used. A range of 0,5 percent to 4,0 percent of additive was used, with variation of 0,5 percent being subjected to compression tests each lime mortar with that variation of additive to identify the optimal percentage. The inclusion of rice starch in the lime mortar increases the compressive strength by the chemical reaction that occurs between calcium carbonate (hydraulic lime) and amylopectin being an abundant component in rice. The lime mortar stabilized with rice starch MCEA 1:2 has a resistance of 25,52 Kilograms per square centimeter so that accomplish the characteristics of a mortar of glue “O” type that have 24 Kilograms per square centimeter at 28 days.
