Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Obtención y caracterización del biomaterial a partir del micelio de hongo (PLEUROTUS OSTREATUS) en aplicaciones de embalaje (EPS)
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-01-22)
    Ayachipo Sillagana Luis Edison
    ;
    Chicaiza Casa Jefferson Paul
    ;
    Yunapanta Velasteguí José Luis
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica
    Currently, pollution is one of the most critical problems in the world, causing a significant impact on the environment and human health. Expanded polystyrene (Flex foam) is one such example, as it is non-biodegradable, pollutes water, and causes irreversible damage to marine life due to its synthetic nature. This research addresses this problem with a sustainable solution for the production of expanded polystyrene in packaging applications using a biodegradable and ecological biomaterial. The biomaterial was obtained from the mycelium of the Grey Oyster mushroom (Pleurotus ostreatus) and sawdust (wood). In this case, a Design of Experiments (DOE) Response Surfaces was implemented with the following considerations: incubation temperature, drying temperature and time, resulting in the production of 15 mixtures. The following compression tests were performed on the samples, yielding the following results for maximum stress (MPa) and maximum strain (mm) according to ASTM D3574 Test C, and hardness testing according to ASTM D2240. Finally, biodegradability tests were conducted, analyzing weight loss and the biodegradation rate in two different environments: under controlled conditions and in a natural environment over thirty days. The test results for the biomaterial show that in compression tests, the maximum stress increased by 135% compared to the conventional material (Flex Foam), while the maximum strain was 32.4% lower. Similarly, in hardness tests, the biomaterial showed an increase of 17.67%. Finally, the biodegradability tests demonstrated superior performance compared to expanded polystyrene (Flex Foam), highlighting its environmental advantages.
  • Item type:Ítem,
    Evaluación de la concentración del gas radón en ladrillos artesanales en las parroquias: Juan Montalvo-San Sebastián e Ignacio Flores comunidad La Vicentina de la ciudad Latacunga, provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03)
    Amancha Caguana, Jaime Enrique
    ;
    Cevallos Cabrera, Jorge Washington
    The mass exhalation has been determined in handmade bricks built in factories in the city of Latacunga (sector: Juan Montalvo, San Sebastian and Ignacio Flores). It is important to consider the effect produced by radon gas in closed places built with this material. In this work we determined the properties of mud, sand and brick and how they influence the emanation and exhalation of radon gas; we also calculated the exhalation produced inside a typical building of this place. In the raw material the exhalation of radon gas are very limited due to the meteorological and geological conditions of the site (Palopo mine), with a radioactivity concentration content for mud (28.9391 plus minus 0.0150) Becquerel per cubic meter, for sand (3.3088 plus minus 0.0050) Becquerel per cubic meter and for bricks (9.7169 plus minus 0.0510) Becquerel per cubic meter. The annual effective dose is due to the inhalation of radon gas produced in a typical building in the sector, with a permanence of 5110 hours per year is 1.982 per 10 to the minus 3 thousand sievert per year. The dose rate of the building materials currently used as recommended by UNSCEAR is 1.1 thousand sievert per year.