Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Análisis comparativo de la resistencia a la compresión de un hormigón tradicional y un hormigón con sustitución del agregado fino por arcilla al 5% y 10% en volumen
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01)
    Flores Tipan Danny Vladimir
    ;
    Navarro Peñaherrera Carlos Patricio
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    This experimental study focused on a comparative analysis of the compressive strength of traditional concrete and concrete in which the fine aggregate was replaced with clay at 5% and 10% by volume, with the aim of conducting a thoro evaluation of the mechanical properties to determine whether replacing the fine aggregate with clay is a feasible option for enhancing the compressive performance of concrete, thereby promoting resource efficiency and environmental responsibility in the industry. Three mixtures were designed using the ACI 2111.1 method for a target strength of 240 kg/cm², including a control sample with 0% clay, one with 5% substitution, and another with 10% substitution. Thirty-six cylindrical specimens were cast and tested at 7, 14, 21, and 28 days in accordance with NTE INEN 1573. The results at 28 days showed that the control concrete exceeded the design strength, reaching 263.77 kg/cm². In contrast, the mixture with 5% clay achieved 237.08 kg/cm², a reductionof 10.1%, and the one with 10% reached 232.16 kg/cm², a reductionof 12.0%. Neither of the two alternative dosages achieved the required structural strength. The decrease in mechanical strength is attributed to the high water demand of the clay, which weakens adhesion in the interfacial transition zone. The experimental results show that replacing fine aggregate with the substitute material reduces compressive strength. Therefore, its use is ruled out for structural concrete with a compressive strength of 240 kg/cm², and lower replacement ratios or its use in non-structural elements should be considered.
  • Item type:Ítem,
    Determinación de la resistencia a compresión de ladrillos macizos fabricados con diferentes tipos de arcilla del cantón Pastaza y su comparación con el ladrillo común
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-07)
    Romero Coyago, Johanna Alexandra
    ;
    Frías Torres, Alex Xavier
    The purpose of this experimental project is to determine the physical properties by means of the moisture absorption test and mechanical properties by means of the compressive and flexural strength tests of the solid artisan bricks, elaborating different batches with some of the clay soils that they are in the province of Pastaza. To carry it out, we proceeded to select three localities in the province of Pastaza and four clay soil samples were taken by carrying out the “Mud Tape” test in the field, in addition, Granulometry tests were carried out to determine its clay content and chemical tests To determine the percentage of silica since this component is one of the main components of clay, once the clay soils were collected, they were transferred to the Cunchibamba parish, Tungurahua province, for the proper manufacture of solid artisan bricks. In addition, specimens were chosen from three artisan brick kilns located in the Cunchibamba and Izamba parish and in the Píllaro Canton of the Tungurahua province. Once the specimens were subjected to laboratory tests, the processing, analysis, interpretation of results and comparison of the obtained values were carried out, thus determining the physical and mechanical properties of each of the batches. Consequently, 80 tests were obtained, determining as a result that the clay soil of Santa Clara is effective, as an additive to the traditional mixture that artisans make in their brickyards, since it significantly improves the quality of the final products.