Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
1 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño de conexiones entre perfiles conformados en frío de sección UV en acero ASTM A36, utilizados para la construcción de torres de telecomunicaciones(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-05) ;Candilejo Simbaña Adrián Alexander ;Martinez Chuncha Alex Daniel ;Peña Jordán Francisco AgustínUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis research focused on the design and evaluation of a bolted connection between cold-formed UV-section profiles made of ASTM A36 steel, intended for telecommunication tower structures. The study arose from the need to improve the behavior of lightweight steel connections subjected to axial loads, since local failure mechanisms can affect the stability of the structural system. For this purpose, a connection configuration was proposed using 6 mm thick UV profiles, 8 mm connection plates, and galvanized A325 bolts. The methodology combined experimental tensile and compression tests on assembled specimens to determine the mechanical response, maximum load and displacement, and associated failure modes. In parallel, finite element models were developed to represent the behavior of the connection under axial loading. The comparison between experimental and numerical results was carried out using the average maximum load as the main evaluation parameter. In tension, an average experimental load of 276,20 kN was obtained, while the finite element model reached 254,22 kN, with a percentage error of 7,96 %. The failure mode was associated with local damage around the holes. In compression, an average experimental maximum load of 258,36 kN was obtained, while the finite element model reached 238,64 kN, with a percentage error of 7,63 %. The failure mode was associated with local buckling of the profile webs and the connection plate. The models reproduced the failure mode and load-bearing capacity of the proposed connection.
