Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 5 de 5
  • Item type:Ítem,
    Caracterización del comportamiento frente al fuego de tres tipos de suelos provenientes de las parroquias Pomona, Tarqui, Diez de Agosto del cantón Pastaza de la provincia de Pastaza utilizados en obras civiles
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Núñez Núñez Joel Sebastián
    ;
    Pérez Maldonado Ruth Lorena
    Civil engineering increasingly faces challenges related to soil behavior under extreme conditions, particularly direct exposure to fire. In Pastaza Province, an Amazonian region of Ecuador where soils are widely used in civil works under MTOP guidelines, there is a notable lack of studies analyzing the effects of thermal exposure on geotechnical properties. This knowledge gap hinders the development of appropriate design criteria for wildfire scenarios— an issue exacerbated by the growing frequency of such events due to climate change and anthropogenic activities. The primary objective of this research was to characterize the fireinduced behavior of three soil types from the parishes of Pomona, Tarqui, and Diez de Agosto, located in the Pastaza canton. The study examined physical and mechanical properties before and after exposure to 750°C, including an assessment of soil flammability. The experimental work was conducted in accordance with AASHTO, ASTM, and NTE INEN standards to ensure accuracy and reproducibility. The methodology was structured into three complementary phases: physical characterization through grain size distribution, specific gravity, Atterberg limits, and permeability tests; followed by mechanical property evaluation using Proctor and CBR tests. Soil samples were subjected to controlled thermal treatment at 750°C to simulate fire exposure, with comparative analyses conducted between natural and post-thermal states. The results revealed significant transformations in the physical and mechanical properties of the tested soils. Exposure to 750°C caused notable mass loss, volumetric changes, and alterations in bulk density and porosity. Pomona exhibited the greatest granulometric variability, with a 5.17% decrease in sand content and a 3.32% increase in fines, along with the highest plasticity index increase 88.89%. Tarqui showed the most significant change in specific gravity, rising by 5.65% to 2.854, and the greatest reduction in bearing capacity, with CBR values dropping by 34.73%. Diez de Agosto recorded the lowest permeability at 1.98E-5 cm/s, which further decreased after thermal exposure. These findings confirm that fire exposure induces drastic changes that compromise geotechnical performance, underscoring the critical importance of integrating these effects into infrastructure design and preventive strategies in fire-prone regions
  • Item type:Ítem,
    Evaluación de la capacidad de la ceniza de la cáscara de coco como estabilizador de suelos
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Capuz Mancero Michelle Yadira
    ;
    Bayas Altamirano Myriam Marisol
    Given the significant environmental impact associated with conventional soil stabilization methods, this investigation evaluates the utilization of coconut shell ash (CSA) as an economic and sustainable alternative. CSA, obtained through controlled carbonization at temperatures exceeding 400°C, comprises oxides of silicon, calcium, and aluminum, which possess the inherent pozzolanic potential to enhance the physical and mechanical properties of soil. The primary objective of this study was to empirically ascertain whether the incorporation of CSA improves soil behavior while concurrently promoting the valorization of agro-industrial waste. Three representative soil samples were collected from distinct regions of Ecuador: Oriente (M1), Sierra (M2), and Costa (M3). Comprehensive physical tests (natural moisture content, Atterberg Limits, particle size distribution) and mechanical tests (Proctor compaction and California Bearing Ratio (CBR) assays) were conducted. The experimental design involved comparing a control specimen (untreated soil) with three specimens incorporating CSA at concentrations of 3%, 5%, and 8% by dry weight of soil. The obtained results unequivocally demonstrated notable enhancements in the soil's bearing capacity. For M1 (Oriente), the natural CBR value of 11.5% increased to 16.7% with an optimal 3% CSA addition; however, higher proportions exhibited a reduction in stabilization effectiveness. In M2 (Sierra), which presented an excellent natural CBR of 20.5%, the incorporation of 5% CSA elevated its value to an impressive 54.1%, thereby permitting its reclassification for subbase applications and signifying potential economic savings in pavement design. Conversely, M3 (Costa), initially characterized by a very low CBR of 4.3%, achieved 13.9% with 5% CSA, considerably improving its classification for subgrade utilization. Furthermore, CSA contributed to the mitigation of soil swell potential, with the efficacy observed to be dependent on the applied dosage and compaction energy. From an economic standpoint, CSA proved to be a highly competitive and sustainable material. Environmentally, its utilization represents a sustainable solution by repurposing agricultural waste that would typically be incinerated or landfilled, thereby contributing significantly to reducing the carbon footprint associated with the production of materials with high embodied energy. Moreover, CSA is characterized as a non-toxic and biodegradable material. While the acquisition process entails certain inherent risks, these can be effectively managed through the application of appropriate techniques and control measures. xv In conclusion, coconut shell ash unequivocally demonstrates its efficacy as a soil stabilizer, proving to be sustainable and economically accessible. Its application not only significantly enhances the geotechnical properties of soil but also offers considerable economic advantages and mitigates environmental impact, thus solidifying its position as a promising option for sustainable civil engineering practices.
  • Item type:Ítem,
    Evaluación de la estabilidad de sitio para la estructura de la unidad educativa Fray Sebastián Acosta perteneciente al distrito 18D03, cantón Baños
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-08)
    Morocho Cadena, Roosevelt Alexander
    ;
    Pérez Maldonado, Ruth Lorena
    Due the request of District 18D03 of Baños de Agua Santa, in collaboration with “Universidad Técnica de Ambato”, this experimental work was carried out with the purpose of evaluating the site stability of the structure of the Fray Sebastián Acosta Educational Unit of the city of Baños de Agua Santa, using the deterministic method. To develop this project, the tectonic regime that will act on the study area was defined, the most active and close faults that may affect were identified, in addition, the Standard Penetration Test (SPT) was performed, which was executed with 5 points in the sector and through mathematical calculations the shear wave velocity was obtained, this value allowed us to establish the soil profile based on the table provided by the NEC-2015. Similarly, the Moment Magnitude is calculated with methods provided by Wells – Coppersmith, and with the Prediction Equations of Ground Motion, acceleration spectra were generated for each selected fault. The accelerations generated by the deterministic spectrum for the structure with periods ranging from 0. 00s to 0. 10s are greater than the NEC-2015 spectrum, which means that the structure presented a risk when exposed to these telluric motions.
  • Item type:Ítem,
    Análisis de las propiedades físico-mecánicas y CBR de suelos cohesivos de subrasante mezclados con partículas de tereftalato de polietileno (PET)
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-09)
    Ocampo Guerrero, Nancy Patricia
    ;
    Castro Solorzano, Fidel Alberto
    The purpose of this experimental work is to analyze the physical-mechanical and CBR properties of natural cohesive soils and cohesive soils combined with polyethylene terephthalate (PET) particles, to be used in the formation of subgrade. For the research, 4 samples of natural soil were taken from 3 different points within the Sevilla don Bosco parish in Morona Canton, province of Morona Santiago with a total of 12 samples of cohesive soil, for which the topsoil was removed and approximately 40 kilograms of the natural sample were collected; polyethylene terephthalate (PET) bottles were also collected and crushed at the Proplasticmax S.A. recycling company. Field and laboratory tests were carried out with natural soil samples and soil samples combined with polyethylene terephthalate (PET) particles, determining: soil type, characteristics, physical-mechanical properties, and CBR. An increase in CBR from 8.4 percent to 11.4 percent was observed. The results obtained in the CBR test, together with the results of the vehicular analysis, were used in the design of the structure of flexible pavement and these thicknesses were compared, obtaining a reduction of 5 centimeters in the total thickness of the road structure.
  • Item type:Ítem,
    Las características del suelo de subrasante de los caminos vecinales de la comunidad de Echaleche Pilahuín y su incidencia en el comportamiento de la capa de rodadura
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Vías Terrestres, 2011)
    Naranjo Perugachi, Víctor Trajano
    ;
    Fabara Villacreces, Víctor Hugo
    Un suelo o capa de firme debe ser capaz de soportar los esfuerzos impuestos por las cargas del tránsito y resistir la acción de los agentes atmosféricos, conservando materialmente uniforme su volumen, cuando no presta estas solicitudes es necesario estabilizarle para reducir los índices de plasticidad y aumentar la capacidad portante del suelo. Existen varias maneras de hacerlo, se puede hacer un reemplazo de suelo con otro de mejores prestaciones o requerimientos, hacer mezclas con porcentajes de cal, cemento, asfaltos, geo textiles, compactación mecánica u otros productos químicos que se han desarrollado para el efecto. Mediante ensayos de laboratorio, se analizan varias alternativas que se podrían utilizar para estabilizar las subrasantes de suelo arena arcillosa; añadiendo al suelo natural de la subrasante porcentajes de toba volcánica, arena, cemento y cal Se verifica entonces la plasticidad y la capacidad portante de suelo que se ha mejorado.