Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 4 de 4
  • Item type:Ítem,
    Elaboración de un programa en Python para análisis seccional de la capacidad resistente al fuego de elementos de hormigón armado y acero estructural
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Ríos López Kevin Fernando
    ;
    Ramírez Cabrera Wladimir José
    In general, the thermal and mechanical analysis of reinforced concrete and structural steel sections is limited to the use of commercial software due to the high computational demand required to perform simulations of this type. This issue has intensified over time because of the growing need to ensure the integrity of structures which, when subjected to fire, may fail to meet the necessary requirements to withstand the situation, potentially causing catastrophic scenarios for users. This project focuses on the development of a computational tool that provides solutions based mainly on specialized standards for analysis under extreme temperature conditions, combined with classical physical principles that allow a precise approximation of the thermal behavior of structural elements, in addition to analyzing the load-bearing capacity of beams and columns as reduced by material deterioration due to exposure. The first phase of the project focused on gathering information and calculation methods that work optimally in a programming language and provide reliable results based on verified scientific literature. In the second phase, algorithms were developed in the Python programming language, adapting each of these processes to ensure efficient and accurate automatic calculation, minimizing errors and optimizing program performance. In the final phase, user interface windows were implemented to facilitate the use of the tool, promoting intuitive navigation through the software’s workflow and offering visually verified and well-founded results.
  • Item type:Ítem,
    Diseño e implementación de un plan de mantenimiento preventivo, para la maquinaria en el área de metalmecánica de la empresa Ecuatran S.A. de la ciudad de Ambato
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-03)
    Quisintuña Chimborazo, Franklin Bladimir
    ;
    López Velástegui, Jorge Enrique
    The development of a maintenance plan helps the conservation of equipment in a company, allowing not only to solve failures but also to prevent them, provides greater reliability in the machinery avoiding downtime due to breakdowns in order to improve productivity. The purpose of this technical project is to design and implement a preventive maintenance plan for the machinery in the metal-mechanics area of Ecuatran S.A. Company in the city of Ambato. Its elaboration began with the development of the technical data sheets and an analysis of the current situation of each one of the machines. Subsequently, the maintenance statistics were carried out to determine the availability and reliability of the machinery. Afterwards, matrices were made with the main parts of each of the machines and based on the Technical Prevention Note NTP 679 to know the risk priority index, in order to identify the components most exposed to failures. Finally, a preventive maintenance plan was elaborated with the projection of a year by means of ranges with their respective duration and frequency, then all the information obtained was implemented in a preventive maintenance software that the company has, this program allows to organize, plan and optimize the management of the maintenance in the company, with the objective of increasing the production preventing unexpected stoppages and expensive repairs of the machines.
  • Item type:Ítem,
    Desarrollo de un software para el diseño de vigas y columnas metálicas de acero conforme a la normativa AISC 360-16
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-03)
    Zambrano Salazar, Luis Leonardo
    ;
    Peñafiel Valla, Lourdes Gabriela
    In the present research project, the graphical interface and the coding of a calculation software for the pre-design and design of steel beams and columns were carried out in accordance with the AISC 360-16 standard, through the use of a programming software and its tool guide. The software allows us to obtain pre-design sections for both beams and columns, which were verified in the design process, proven that they resist the requests to which they are exposed to the structure under analysis, all this is done by entering data such as: geometric configuration of the structure, load states and properties of the steel to be used. For the development of the software, it has been necessary to carry out a bibliographical investigation where the LRFD (Load and Resistance Factor Design) method is extended, for the design of steel beams and columns, which is approved by the American Institute of Steel Construction. (AISC 360-16) and the Ecuadorian Construction Standard (NEC 2015). Once the calculation method was determined, the algorithms necessary for the software coding were developed, once defined, the graphical interface of the same was elaborated. Once the development of the software was completed, a debugging of the programming code was carried out where the calculation algorithms were optimized to achieve a better and faster operation of the software. The validity of the developed program will be verified through a comparison of the results obtained through the software, manual calculations and a commercial program, obtaining an error rate of less than 0.8 percent, with which it was possible to verify that the calculation values obtained through the software developed in this research they are valid and reliable, thus achieving an optimization in the calculation time and precision in them, since being an automated software the human factor capable of committing involuntary errors during the manual process is eliminated. of calculation.
  • Item type:Ítem,
    Desarrollo de un software específico para el diseño de conexiones de arriostre o viga-columna para pórticos especiales arriostrados concéntricamente, conforme a la normativa ANSI/AISC 341 -16
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-03)
    López López, Liliana Lizbeth
    ;
    Pico Núñez, María Fernanda
    ;
    Medina Robalino, Wilson Santiago
    The present research project has as purpose the codification of a specific software for bracing connections or beam-column connections design for steel special concentrically braced frames (SSCBF). It allows us to design in a quick and safe way the simple beamcolumns (bolted) connection, welded beam-column connection, double braced beam column (welded) connection, X brace-beam (welded) connection, simple beam-column (bolted) corner connection, and simple beam-column (welded) corner connection. For the design of the different connections, they were analyzed by ANSI/AISC 341-16 Standards criteria. From it the calculation equations for a design by capacity were taken. For the development of the software, we started with the manual calculation of the different connections, with this the software programming code was developed and at the same time the graphic interface for the visualization of the results was created. For the veracity of the SCBF DESIGN CONNECTION software, the results obtained by the developed software were compared with the manual method; resulting in a margin of error of less than 1.50 percent, thus verifying that the results obtained by the software are reliable.