Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 7 de 7
  • Item type:Ítem,
    “Diseño de un sistema de energía hidrocinética en aplicaciones a pequeña escala en la comunidad ancestral de San Isidro en la provincia de Cotopaxi
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Allauca Copara Pachacutic Porfirio
    ;
    Montero Jarrin Jeremy Israel
    The current project focuses on the design of a hydrokinetic turbine that would mitigate regional energy deficit and would replace the use of petrol generators, thus reducing fossil fuel dependence. By providing a clean and sustainable energy supply, this proposed solution will support the operation and implementation of other planned and ongoing community projects. During the design process, data were collected detailing the flow rate and variations in overall flow; these measurements were taken at the water-capture point at the start of the irrigation system. These parameters are fundamental for assessing the potential use of the kinetic energy of water; by applying theoretical principles such as Betz’s law and Houlsby’s theory, the current project further calculates system performance rates and also estimates the effects of system blockages or disruption. This research, and the proposal developed herein, identifies and designs a system that would meet critical energy needs at the community level. Through technical calculations, this work determines critical variables such as the amount of power generated, the angular velocity, and the acting torque on the rotor axis. Additionally, a CFD (computational fluid dynamics) simulation model was used to analyze flow mechanics around the turbine itself. Based on these calculations, an estimated output power was obtained of 98.46 Wh. This represents a viable alternative for renewable energy generation – suitable not only for the specific needs of The Ancestral Community of San Isidro, but also more broadly for off-grid rural communities elsewhere in Ecuador and around the world.
  • Item type:Ítem,
    Diseño de un sistema de abastecimiento de energía eléctrica con el uso de energías alternativas como la hidráulica en viviendas unifamiliares en la parroquia de Montalvo del cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-02)
    Cofre Pinta, Edison Fernando
    ;
    Chérrez Gavilanes, Diego Sebastián
    The main objective of the work is to provide an optimal and safe design of a totally sustainable and environmentally friendly hydraulic generation system, adjusting to the energy needs of the area under study, taking advantage of modern technology for the generation of clean electricity at a lower cost. In the first instance, the energy consumption of the houses located within the study area was determined, as well as the flow of the “Canal de Regadío Ambato-Huachi - Pelileo”, essential data to start the design of the hydraulic system. The hydraulic system to be implemented is by means of a pico-central of electricity generation based on a gravitational vortex, which generates a rotational movement and according to the input flow it is capable of driving the rotation of a vertical turbine, same as through a generator can be transformed into usable electricity for a home. The entire design is based on simulations and scale models, the simulation is by means of the free engineering software "Ansys Academic Student", both the tank and the turbine are modeled on a real scale to analyze the behavior of the fluid within it and observe the feasibility of formation of a gravitational vortex. The scale model starts from the data of the simulation carried out, but in this the main objective is to find the real efficiency of the energetic system with respect to the calculated theoretical power, thus it can be stated with great certainty the real power that the system will reach in its real size. Finally, the same plans of the structure designed with the corresponding measures and scales, appropriate to the place of implantation, are made, with price analysis and total budget of the hydraulic system.
  • Item type:Ítem,
    Diseño de un sistema de abastecimiento de energía eléctrica con el uso de energías renovables como la solar en viviendas unifamiliares en la parroquia Atahualpa, cantón Ambato, provincia Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-10)
    Quintana Vásconez, Roberto Sebastián
    ;
    López Arboleda, Alex Gustavo
    This technical project has as main objective the calculation and dimensioning of an isolated photovoltaic system to supply electricity to single-family homes that have limited resources from the Atahualpa parish, Ambato canton. It is desired that with the development of this type of projects the population is encouraged to search for and implement renewable energies that contribute to stop the negative global impact that several traditional practices of electric power generation are causing. To determine the components of the isolated photovoltaic system, a survey was carried out on 54 low-income houses belonging to the aforementioned parish. Once the monthly energy consumption had been determined, the housing was classified according to what is established in the Tariff Schedule for electric distribution companies for the period January - December 2020, issued by the electricity regulation and control agency, thus obtaining 3 types of housing , including a type house called survey which presents an energy demand equal to 8.70 kilowatt hours per day. To size the components, it was necessary to obtain the total monthly average daily irradiation value on an inclined surface, for which the meteorological data exposed by different specialized software were used, the irradiation value obtained by the Lui and Jordan Method is 3,887 kilowatt hours. per square meter per day with a solar panel inclination equal to 10 degrees. The components calculated for the Survey House are as follows: 10 solar panels connected in parallel with a nominal power of 350 watts, 8 batteries connected in parallel with a nominal capacity of 150 amp hours, 1 voltage regulator capable of satisfying a current of input and output of 89.75 amps and 24.07 amps respectively, 1 inverter with continuous power of 1500 watts with the capacity to satisfy 520 watts. The results for said house are presented since it is the one that most closely matches the reality of the sector, the total cost of the isolated photovoltaic system includes general construction items, the value of the components of the isolated photovoltaic system, the metal support structure and labor is $ 9908.25
  • Item type:Ítem,
    Diseño de un sistema de abastecimiento de energía eléctrica con el uso de energías renovables como la eólica en viviendas unifamiliares en la parroquia Ambatillo cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-10)
    Pérez Barrionuevo, Franklin Andrés
    ;
    Guevara Robalino, Jorge Javier
    This technical project describes a plan to generate electricity using the wind resources of Ecuador. In the first instance a brief explanation is indicated regarding renewable energies, especially wind energy and its importance. The next step is an investigation on the operation of the wind turbines that will accommodate the generation of energy in a social interest housing. An analysis of the area in question is necessary, specifically the wind speeds presented during the days of the research work, as well as other considerations for subsequent data such as: atmospheric pressure and air temperature of the measurement stations. closest to the place. Continuing, the design of the proposed system for the implementation in the home in the future is dimensioned and planned, previously the most important variables such as economic, technical and meteorological to carry out this project. Subsequently, a cost-benefit analysis of the system is proposed, compared with the traditional electrical system implemented by the public electricity company, thus determining the advantages and disadvantages of the wind system. In the future, the specific information in this thesis project is expected to provide sufficient technical knowledge to carry out the practice of a wind energy application in Ecuador, not only at the level of single-family and multi-family housing, but at large industries and large systems in general, since it is a clean energy that will benefit the country.
  • Item type:Ítem,
    Diseño de un convertidor que permita transformar la energía eléctrica obtenida mediante un sistema de generación híbrido compuesto por paneles solares fotovoltaicos y un generador eólico en energía térmica
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020)
    Moreta López, Luis David
    ;
    Carrillo Rosero, Carlos Mauricio
    The present technical project has as its central research objective the design and construction of an energy converter that allows to transform the electric voltage of the batteries that is generated by a system of unconventional resources consisting of a combination of photovoltaic solar panels and a wind generator, to obtain thermal energy used in the process of heating water for domestic use. The geographic and environmental conditions of the white river community as a cold climate prevails, generated the need to install a water preheating system consisting of flat plate thermal panels and vacuum tubes driven by the solar radiation intensity of the area and connected directly to the water supply for exploiting the potential of volumetric flow. The design of the converter components was made based on the technical characteristics of the electrical potential installed in the white river community to increase the efficiency of the water heating processes guaranteed a low energy consumption through drive depending on the hot water requirement. The purpose of the operation tests is to verify and sustain that the converter can operate continuously and without interruptions and reach high levels of efficiency during all times of the year considering the climatic conditions to which it is exposed in the community, the climate variation as a function of time is quantified with the data obtained in the area by previous investigations in order to make projections that allow to know the trend of behavior of parameters such as radiation. Finally, the performance tests were carried out by taking data in the area through the control and monitoring system that allowed the collection of values with respect to the increase in the magnitude of the water temperature, and the operation of the converter was guaranteed throughout the year by means of projections with reference to previous bibliographic data taken from the irradiance of the area, thus demonstrating the high efficiency of operation of the project under all conditions likely to arise in the area.
  • Item type:Ítem,
    Obtención de energía eléctrica mediante un generador de imanes permamentes de flujo axial a partir de rotobombas con turbinas Pelton y Michell Banki disponibles en el laboratorio de la FICM
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2019)
    Chimbo Hidalgo, Israel Xavier
    ;
    Mayorga Pardo, Alex Santiago
    The present technical work consists of the generation of electrical energy by means of an axial flow generator of permanent magnets coupled to two rotobombs, one with Pelton turbine and another with Michell Banki turbine available in the laboratories of the FICM. To give the movement to the turbines, they have been installed in the "El Silencio" waterfall located in the Ulba’s Parish, Baños Canton, Tungurahua’s Province, which is 30 meters high to take advantage of the fall of water. The AC generator was coupled to 2 rotobombs with Pelton and Michell Banki turbines and the movement is transmitted by means of belts and pulleys, electric loads of different resistance to the generator were applied and tests were carried out to obtain water flow data, rotation speed of the generator, voltage and amperage. It was necessary to measure and record these variables all at once, so an electronic equipment was built which takes and records the measurements with a speed of 1 data per second. Similarly, generation data were obtained without electric charge to the generator. With the obtained data, electrical power and pumping power were determined with the applied loads and a comparison of voltages obtained between the two machines was made without applying electric charge. Obtaining a maximum amperage of 4A, maximum voltage of 29.5V, maximum electrical power of 118W at an average speed of rotation of the generator of 900 RPM and a flow rate of 32 l / s of input to the turbo-pump with Michell Banki turbine, while for the Pelton turbo-pump with a maximum amperage of 4A, maximum voltage of 23V, maximum electrical power of 89W at a rotation speed of 800 RPM and a turbine inlet flow of 20 l / s. The maximum pumping power obtained in the 2 rotobombs was 6218W at 20m of pumping height. In the comparison of no-load tests, it was determined that the Pelton turbine pump requires less flow to obtain the maximum voltage of 22V than the rotobomb with Michell Banki turbine.
  • Item type:Ítem,
    La resistencia del suelo y su incidencia en el tipo de cimentación para la línea de subtransmisión a 69 kv Puyo - Mushullacta
    (2012)
    Cañar Ramírez, Gabriela del Pilar
    El presente trabajo de investigación fue realizado como una contribución hacia los pobladores que se encuentran a lo largo del km 38 de la vía Puyo Macas; y contiene, el estudio preliminar de suelos y el diseño de la cimentación, planos y análisis de precios unitarios. Explica el tipo de suelo existe en el sector, y además un diseño de la cimentación para la estabilidad de las estructuras de líneas de subtransmisión. A través de este proyecto de ingeniería eléctrica el país da un impulso en la provincia de Pastaza, para lo cual se ha diseñado la correspondiente fundación. Estos datos permitieron realizar un análisis minucioso con el que se realizaron los correspondientes diseños que constan en este trabajo, así como también los respectivos planos constructivos. Por último, también se adjunta un presupuesto referencial de cada una de las cimentaciones, que ayudará como referencia a posteriores estudios eléctricos en el sector.