Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 3 de 3
  • Item type:Ítem,
    Análisis de aluminosilicatos como material de sustitución parcial del cemento tipo GU en la construcción
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-02)
    Yanchaguano Toapanta, Doris Verónica
    ;
    Coello Fiallos, Diana Carolina
    In this work, the study of physical, chemical, and mechanical properties was carried out, mainly encompassing density and fineness, applying the INEN 0156 and INEN 0489 standards respectively with Natural Zeolite samples: ZR, ZC collected from rock of the Mina Zeonatec and ZCa obtained from the Calmosacorp S.A. processor, as well as from the CGU cement. The results obtained from the tests carried out with respect to density show values of 2.304, 2.330, 2.339 and 3.075 grams per cubic centimeter, in the same way the results of finesse 99.83, 99.71, 99.87 and 99.95 percent with zeolites ZR, ZCa, ZC, and CGU respectively are presented. With chemical characterization morphology was obtained by SEM, where in the analysis they showed similarity between samples, especially when analyzing SEM images of the CGU and ZC samples, where the shape of the crystals are angular polyhedral with superficially fine sizes and mostly flat grains. The EDS analysis is also known for the concentration of chemical elements that make up each of the samples studied and the silicon-aluminum ratio contained in such samples, thus outstanding the Si/Al ratio of ZCa with a value of 4.52 dimensionless which represents better concentration than the same CGU with 3.4. Zeolites with better properties were compared, concluding that zeolite ZC presents conditions suitable for replacement by CGU since both density, fineness and morphological characterization showed results close to cement.
  • Item type:Ítem,
    Estudio de las propiedades físicas de zeolita natural (aluminosilicato) de tipo clinoptilolita para remplazo parcial del cemento portland
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-01)
    Salcedo Rivera, Verónica Elizabeth
    ;
    Coello Fiallos, Diana Carolina
    This study shows physical and chemical characteristics of natural zeolites (ZN) called ZA, ZZ, ZI from outcrops of the Chongón Colonche Mountain range located in the Guayas province of Ecuador and of the cement Type GU (CGU) for commercial use, with the purpose to determine if they can be supplemental cement material (SCM). Physical characteristics (density and fineness applying INEN and ASTM standards), morphological characteristics in the Scanning Electron Microscope (SEM) and elemental composition are determined by X-ray scattering spectroscopy (EDS). Prior to the tests, the samples that require grinding are prepared to obtain granules smaller than 75 microns. Densities of 3,071, 2,449, 2,511 and 2,494 grams per cubic centimeter and fineness percentages of 99.95, 99.04, 99.51, and 99.35 are obtained for CGU, ZA, ZZ and ZI, respectively. The experimental results, SEM micrographs and EDS spectra reveal that all samples have potential as SCM, highlighting ZA and ZZ with characteristics closer to CGU. All have a high pozzolanic capacity in the content of silica, alumina and iron oxide, exceeding the minimum specified by the ASTM C 618 standard. On the other hand, the siliconaluminum ratio between 2.67 and 4.83 shows the presence of clinoptilolites that have demonstrated efficacy as SCM. The compatibility in terms of its structure, sizes and chemical composition is obvious, however, for subsequent studies it should be taken into account that CGU cement is highly silicic compared to other cements used in studies with zeolites.
  • Item type:Ítem,
    Estudio comparativo de las propiedades físicas de aluminosilicatos del cantón Guayaquil para sustitución parcial del cemento portland IP
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-01)
    Fernández Álvarez, Ramiro Paul
    ;
    Ureña Aguirre, Maritza Elizabeth
    Since cement is a natural or artificial material present in almost all the buildings in the world, it is normal to say that it is the consumer of large amounts of natural resources and emitter of carbon dioxide, so there is a need to find a substitute of cement for sustainable and environmentally friendly materials. In the Civil Engineering laboratories, the physical (morphology, density, grain size, fineness) and chemical properties of the aluminosilicates ZA, ZI, ZZ (zeolites) of the canton of Guayaquil were compared with those of Selva Alegre IP cement. Apply the density test using the NTE INEN-156 standard, obtaining values of ZZ equal to 2,514, ZI equal to 2,485, and ZA equal to 2,445 grams on cubic centimeter by pycnometer calibration and other values of ZZ equal to 2,353, ZI equal at 2,233, and ZA equal to 2,408 grams per cubic centimeter at room temperature, which indicate that the density of the zeolite is very variable. I present the final percentages of fineness according to NTE INEN-489 of the samples of ZZ equal to 99.51, ZA equal to 99.04, ZI equal to 99.35, which are optimal in constructions and are compared with the percentage of IP cement equal to 99.72, grinding and granulometric graphs are also presented as an additional contribution to the investigation. On the other hand, the morphological and chemical characterization is indicated, by microscopy, the EDS showed a homogeneous distribution of elements of the zeolites with respect to the cement, but a heterogeneous quantity in percentages of each element. Defined cubic crystalline structures and other amorphous forms with dimensions from 1 to 20 microns were observed in the SEM of IP cement, differing from ZZ, ZI, ZA that presented crystals with irregular surfaces and undefined, elongated and polyhedral structures with dimensions ranging from 1 to 50 microns. The final results of the physical and chemical tests show the feasibility of using these aluminosilicates as a material with potential cementing characteristics to be a substitute for Selva Alegre IP Portland cement.