Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 3 de 3
  • Item type:Ítem,
    Diseño de conexiones entre perfiles conformados en frío de sección transversal uv en acero ASTM A572 grado 50 utilizado en la construcción de torres de telecomunicaciones
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-08)
    Chico Segura Marlon Sebastián
    ;
    Salazar Aguilar Angel Gabriel
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica
    This research addresses the analysis of bolted connections composed of UV profiles and plates, which are commonly used in the construction of telecommunication towers. The behavior of the bolted joint is examined through experimental testing (compression and tension tests) and numerical simulation. It is important to highlight the use of the AISC 360-22 standard as the structural design guide, as well as the AWS D1.1 code for the design of welded joints required for the fabrication of the gripping elements used in the tensile test specimens. The experimental work consisted of conducting three tensile tests and three compression tests to identify the critical elements in each connection and subsequently obtain force–displacement curves from the results. Additionally, before performing the final tests, preliminary compression and tensile tests were carried out to determine the stiffness of the bolted structure. Regarding the numerical simulation, a three-dimensional model based on surface elements was developed. The necessary conditions were established to accurately represent the physical behavior of the structural joint and to demonstrate the agreement between the experimental and simulated force– displacement responses. In summary, the study emphasizes the comparison of forces and displacements in bolted connections subjected to axial loading.
  • Item type:Ítem,
    Análisis de los desplazamientos de los apoyos superiores de las torres durante la simulación de las fases de construcción de un puente colgante sobre el río Jatun Yacu
    (Magister en Ingeniería Civil con mención en Estructuras Metálicas, 2025)
    Jácome Villacrés, Pablo José
    ;
    Peñafiel Valla, Lourdes Gabriela
    This research addresses a topic rarely explored in technical literature: the analysis of the behavior of upper tower supports in suspension bridges, both during the construction process and in their service life. This lack of practical information motivated the development of a study based on a real-world project, aiming to simulate near-reality conditions and obtain reliable data on the displacements generated by the weight of the structural elements. To address this problem, an applied research was conducted using a real suspension bridge project. The main objective was the development of a threedimensional model using specialized software, which allowed for the simulation of various construction phases of the superstructure, as well as the application of a hypothetical and random load convoy to evaluate in-service behavior. The analysis allowed for the observation of stresses in the main cable and the resulting displacements, identifying that the sum of movements generated during construction and by vehicular load exceeded the available travel in the upper supports. Given this situation, it was necessary to iteratively apply a pre-stress to the main cable in the lateral zones of the bridge to correct the structural behavior. Finally, after adjusting the initial cable deformation as pre-stress, it was validated that the displacements during the construction and operation phases remained within acceptable limits, ensuring the correct functioning of the upper supports and the overall suspension bridge structural system
  • Item type:Ítem,
    Diseño y construcción de una máquina para ensayos de tensión que caracterice los efectos que producen los cambios de geometría en una probeta plana
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-09)
    Bastidas Sarabia, Bryan Isaias
    ;
    Gamboa Sangoquiza, Luis Fernando
    ;
    Arroba Arroba, César Hernán
    Tensile tests are important to understand the mechanical behavior of different materials when subjected to different loads and conditions. These tests allow understanding the different properties such as strength, elasticity, ductility, and stiffness of the element, being crucial for the design and selection of materials in industrial and structural applications. However, it is necessary to keep in mind that geometry changes in flat specimens have a significant impact on the mechanical behavior of the materials while they are subjected to stress. These changes include variations in the cross section, due to the presence of holes or different geometrical irregularities generating a concentration of stresses and different localized deformations. This is the reason why the necessary knowledge is provided to design and build a machine that allows visualizing the geometry changes that originate in a specimen. Previous research on the subject was carried out, continuing with design ideas, and following the design parameters given by the book "Shigley's Design in Mechanical Engineering". Once the design and analysis were done in the different softwares, we proceeded to verify plans for the construction of the prototype. Once the machine was built, the calibration and printing of different specimens was carried out.