Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, La adición de bolsas plásticas en la elaboración de bloques de adobe para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Cabay Cepeda, Sandra RocíoNúñez Aldás, Galo WilfridoThe present investigation intends to evaluate the use of plastic bags in the manufacture of blocks of adobe, with the objective of determining the thermal variation and the acoustic conditioning; for this analysis, dosages were established with the addition of 5%, 10% and 15% of crushed plastic bags, independently of the adobe elaborated in the traditional way, which were evaluated in the form of a panel using a hermetic chamber, which by means of the use of equipment The insulating properties of each block were determined. To validate the proposed tests, a comparison was made between traditional adobe; and the adobe blocks with the addition of plastic bags, which exceeded the insulating properties of the traditional block, both in the faces of the wall, and in the environments. In addition, the acoustic properties were evaluated, which presented favorable results, with a direct relationship with the addition of plastic bags, and achieving a comfortable indoor environment, in the face of external noise. Similarly, the compressive strength of adobes presented higher values than the one stated in the E0.80 standard, but when the percentage of plastic bags increased to 15%, this factor decreased, whereas the adobe block added 10%. of plastic bags presented greater thermal and acoustic insulation capacity; together with a resistance of 12.19 kg /cm2, keeping the three parameters in balance, and complying with the provisions of the regulations, so that it can be applied in future studies.Item type:Ítem, La adición de bolsas plásticas en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Cando Pichucho, Carlos XavierChérrez Gavilanes, Diego SebastiánThe present experimental work evaluated the use of the crushed plastic bags in the manufacture of relieved blocks, to determine the variation of temperature and acoustic conditioning. In the first place, a material dosage was elaborated in which the coarse aggregate was replaced by 15%, 25%, 50% and 75% of plastic bags crushed, which was used to make the blocks. The blocks were tested under compression, in which it was found that the block with 15% of crushed plastic bags obtained a compression resistance value of 3.78 Mpa which reveals that meets the minimum value of 3.5 Mpa of compressive strength proposed by Standard NTE INEN 3066. Then, walls were made with the blocks, which were placed inside a chamber to evaluate the temperature variation and acoustic conditioning by temperature and sound sensors, and the Xplorer GLX equipment, where it was proved that the wall with 50% of crushed of plastic bags presents the best temperature variation with an insulation of 34.91 ºC and the wall with 15% presents the best acoustic conditioning with 47.35 dBA. Finally, it was concluded that the block with 15% of crushed plastic bags presents the best performance in terms of compression resistance, temperature variation, and acoustic conditioning to be used in single-family homes in Ambato canton, Tungurahua province.
