Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 7 de 7
  • Item type:Ítem,
    Obtención y caracterización del biomaterial a partir del micelio de hongo (PLEUROTUS OSTREATUS) en aplicaciones de embalaje (EPS)
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-01-22)
    Ayachipo Sillagana Luis Edison
    ;
    Chicaiza Casa Jefferson Paul
    ;
    Yunapanta Velasteguí José Luis
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica
    Currently, pollution is one of the most critical problems in the world, causing a significant impact on the environment and human health. Expanded polystyrene (Flex foam) is one such example, as it is non-biodegradable, pollutes water, and causes irreversible damage to marine life due to its synthetic nature. This research addresses this problem with a sustainable solution for the production of expanded polystyrene in packaging applications using a biodegradable and ecological biomaterial. The biomaterial was obtained from the mycelium of the Grey Oyster mushroom (Pleurotus ostreatus) and sawdust (wood). In this case, a Design of Experiments (DOE) Response Surfaces was implemented with the following considerations: incubation temperature, drying temperature and time, resulting in the production of 15 mixtures. The following compression tests were performed on the samples, yielding the following results for maximum stress (MPa) and maximum strain (mm) according to ASTM D3574 Test C, and hardness testing according to ASTM D2240. Finally, biodegradability tests were conducted, analyzing weight loss and the biodegradation rate in two different environments: under controlled conditions and in a natural environment over thirty days. The test results for the biomaterial show that in compression tests, the maximum stress increased by 135% compared to the conventional material (Flex Foam), while the maximum strain was 32.4% lower. Similarly, in hardness tests, the biomaterial showed an increase of 17.67%. Finally, the biodegradability tests demonstrated superior performance compared to expanded polystyrene (Flex Foam), highlighting its environmental advantages.
  • Item type:Ítem,
    Evaluación de la concentración del gas radón en ladrillos artesanales en las parroquias: Juan Montalvo-San Sebastián e Ignacio Flores comunidad La Vicentina de la ciudad Latacunga, provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03)
    Amancha Caguana, Jaime Enrique
    ;
    Cevallos Cabrera, Jorge Washington
    The mass exhalation has been determined in handmade bricks built in factories in the city of Latacunga (sector: Juan Montalvo, San Sebastian and Ignacio Flores). It is important to consider the effect produced by radon gas in closed places built with this material. In this work we determined the properties of mud, sand and brick and how they influence the emanation and exhalation of radon gas; we also calculated the exhalation produced inside a typical building of this place. In the raw material the exhalation of radon gas are very limited due to the meteorological and geological conditions of the site (Palopo mine), with a radioactivity concentration content for mud (28.9391 plus minus 0.0150) Becquerel per cubic meter, for sand (3.3088 plus minus 0.0050) Becquerel per cubic meter and for bricks (9.7169 plus minus 0.0510) Becquerel per cubic meter. The annual effective dose is due to the inhalation of radon gas produced in a typical building in the sector, with a permanence of 5110 hours per year is 1.982 per 10 to the minus 3 thousand sievert per year. The dose rate of the building materials currently used as recommended by UNSCEAR is 1.1 thousand sievert per year.
  • Item type:Ítem,
    La adición de aserrín y poliestireno en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019)
    Morales Apráez, Jorge Luis
    ;
    Guevara Robalino, Jorge Javier
    In the development of the present investigation, in the first instance tests were performed on the aggregates to form the masonry according to an initial dosage that allowed us to obtain good results at compression based on the INEN 3066 norm. The study addressed, opted for the substitution of the chasqui by 15%, 25% 50% and 75% sawdust, from which it was obtained that the handcrafted blocks have an approximate resistance of 10.96 kg / cm² and that under this parameter the blocks of 15 and 25% comply with the ranges established as original dosage unlike the artisan blocks, while the one with 50 and 75% sawdust is discarded, due to its very low compressive strength. On the other hand, within the present and following the Chilean regulations NCH 849 and NCH 851, a thermal and acoustic test was carried out, obtaining as a result that the block with 75% sawdust has greater thermal insulation capacity unlike the other blocks tested, while the block with 25% dosing of the aggregate has greater acoustic insulation capacity. Within the study addressed, the process carried out for both manufacturing and laboratory tests is clearly indicated, which generated feasible results, framed within the normative statutes for construction.
  • Item type:Ítem,
    La adición de aserrín y poliestireno en la elaboración de bloques de adobe para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019)
    Pino Escobar, Holguer Alejandro
    ;
    Núñez Aldás, Galo Wilfrido
    The present experimental work evaluated the use of sawdust and polystyrene in the elaboration of blocks of adobe to determine the variation of temperature and acoustic conditioning. Firstly, a soil selection and analysis process were carried out based on the E-080 standard, later, traditional adobe blocks and adobe blocks were prepared with a percentage of 5%, 10% and 15% of sawdust and polystyrene in addition to each mixture. The blocks were tested under compression in the course of 28 days from its preparation, the test showed that all the samples analyzed exceeded the minimum resistance of 1MPa established in the E-080 Standard, but the highest compressive strength obtained was 2.66 MPa in blocks with 5% sawdust and polystyrene, thus exceeding the minimum resistance by 50%. Before making the test, adobe walls were made with each percentage of additives established, which were assembled inside the chamber, consecutively they were put to the thermal analysis based on the NCh 851 - NCh 849 norms and acoustic based on the norm NCh 2865. Finally, when quantifying the results, it was found that the wall made with adobes plus 5% and 15% sawdust and polystyrene maintains the best thermal variation and acoustic conditioning in such a way that it was selected as the best block prototype for the present investigation.
  • Item type:Ítem,
    Análisis del aserrín como material filtrante en el tratamiento de aguas residuales provenientes de la lavadora de jeans “Lavajeans” en el cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2018)
    Ponluisa Patiño, Edgar Fernando
    ;
    Núñez Aldás, Galo Wilfrido
    The purpose of this experimental work is to analyze the efficiency of sawdust as a filtering material for wastewater treatment. For the development of the project, it was possible to carry out the wastewater coming from the jeans washer "LAVAJEAN'S", from which it was possible to know the processes used for dyeing and washing the jean. Regarding the filter model, it was carried out based on what was established in the UPICIC. The monitoring of the filter was developed in a time of 10 days, in which 6 samples of residual water, 3 crude samples and 3 filtered samples the first week, were taken weekly; 3 crude samples and 3 filtered samples the second week, which were analyzed in the laboratories of "Lacquanálisis public limited company." The parameters of DQO, DBO5 and COLOR were analyzed, whose results were compared to determine the efficiency of the filter, comparing the raw sample with its respective filtered sample, and verifying whether or not they comply with the Maximum Permissible Limits stipulated in the TULSMA. Based on the results, it was determined that sawdust as a filtering material progressively decreases the aforementioned parameters from the first day, also because it is an easily obtained material it can be used as pre-treatment in these wastewater. Keywords: Sawdust, filtering material, wastewater, jeans washer, treatment, analysis, efficiency.
  • Item type:Ítem,
    Análisis del aserrín como filtro en el tratamiento de aguas residuales proveniente de la Industria de Textiles Andelas Cía. Ltda.
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2018)
    Sinalín Sisalema, Fernanda Maricela
    ;
    Arias Salazar, Daicy Paola
    This work was carried out with the negative environmental impact generated by wastewater from the textile industry, to improve its characteristics before being discharged into the sewerage system, looking for a more ecological and low cost alternative. In the Methodology, issues that lead to the adequate development of the research are addressed, which describe the productive process of the industry, its location, distribution, description of the infrastructure, implementation of the project and its operation: this was established and the population was shown , verifying the variables, with a collection of information and samples according to what is necessary. The data obtained in the development of the cycle were interpreted and tabulated, as well as the information regarding the water inlets and the waste water outlet.The results of the parameters studied are compared with other bibliographies to verify the hypotheses. Subsequently, the objectives established in the investigation are verified. With the present experimental work suggests that the sawdust for its efficiency of 44%, be studied subtly to use it, since its effectiveness varies depending on these parameters: the size of the particles, the optimum quantity, the type of sawdust that is needed for this treatment, and in this way could be used as filtering material in the treatment of wastewater from the textile industry, considering that it is good for retaining solids, oils, metals, etc. and that a natural absorbent.
  • Item type:Ítem,
    Evaluación de un filtro artesanal del efluente de una lavadora de autos a base de bagazo de caña de maíz, aserrín, ceniza de carbón vegetal y grava
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2016)
    Jiménez Navas, Maricela Nataly
    ;
    Morales Fiallos, Fabián Rodrigo