Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Metodología para la verificación estructural de monopolos de telecomunicaciones por medio de túnel de viento en software aplicable.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2025-12-03) ;Domínguez Vargas, Wellington AndrésPeña Jordán, Francisco AgustínThis research addresses a critical deficiency in the structural design of telecommunications towers in Ecuador. National regulations (NEC) are limited in their specifications for wind loads, forcing engineers to resort to international standards such as ANSI TIA-222-H. However, this standard, although robust, presents simplified methodologies that fail to accurately capture microtopographic conditions and wind directional variability at the specific site location, leading to possible oversizing or, in the worst case, omissions that compromise safety. The overall objective of this study was to verify the structure of a telecommunications monopole located in Tungurahua. The research was designed as a comparative case study. First, the traditional design of the structure was carried out following the parameters of the ANSI TIA-222-H standard. Second, a Computational Fluid Dynamics (CFD) model was developed using the RFEM6 and RWIND3 programs. The comparative analysis shows a variation of 18 mm, demonstrating that the traditional method of the standard is slightly more conservative. This confirms that CFD simulation not only validates the design but also offers optimization by modeling real conditions more accurately. It is concluded that establishing a dual methodology, where CFD analysis complements the standard, is the ideal strategy to ensure a design that is simultaneously optimized, safe, and fully compliant with industry standards.Item type:Ítem, Implementación del proceso de conservación de la estructura de la capa de rodadura de la vía Pelileo - Cotaló ABS 8+000 – 12+000 de la provincia de Tungurahua.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-03) ;Domínguez Vargas, Wellington AndrésLópez Arboleda, Alex GustavoThe Pelileo - Cotaló road serves as an alternative road to the city of Riobamba and moreover, it works as a link between the neighboring towns that base their economy on commerce and agriculture. A correct operation and high serviceability of the road facilitate this communication and exchange of products. For this reason, establishing a maintenance and conservation plan for its structure will allow us to extend its useful life. The first step of the project was the georeferenced survey of the road using a GPS device, obtaining 448 points, with which a georeferenced model was plotted. A vehicle control point was established, counting vehicles in 12-hour intervals during 7 consecutive days, values necessary for the TPDA and the Future Traffic projected to 20 years, obtaining that the study road according to the MOP is a Class I Arterial Corridor. To determine the bearing capacity of the soil, samples were extracted for analysis, resulting in the soil belonging to the fine sand group with an average CBR of 13.71 percent, which indicates that the soil used for subgrade is in the "Fair - Good" range. Using the PCI method, which was performed in 15 sampling units, a value of 82.6 was obtained, which means that the road has a satisfactory level. The behavior of the pavement structure was evidenced in the type I deflections, which indicate a satisfactory behavior. Finally, with all these preliminary studies, a routine road maintenance plan was proposed to recover the serviceability of the road and maintain it in good condition for future years.
