Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.uta.edu.ec/jspui/handle/123456789/36305
Título : | Optimización-MSR del material compuesto de matriz epoxi reforzado con fibra natural de Chambira (Astrocaryum), mediante infusión de resina al vacío y su incidencia en las propiedades mecánicas |
Autor : | Paredes Salinas, Juan Gilberto Gavilanes Medina, Brayan Eduardo |
Palabras clave : | ENSAYO DE TRACCION ENSAYO DE FLEXION ENSAYO DE IMPACTO ASTM D7264 ASTM D3039 ASTM D52628-10 VACUMM BAGGIN |
Fecha de publicación : | sep-2022 |
Editorial : | Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica |
Resumen : | The importance of the discovery of new materials based on natural fibers greatly contributes to the contribution of properties that are often friendly to the environment, as well as for the bodywork industry to be effective when making accessories. Therefore, the purpose of this research is to investigate and analyze the mechanical properties that can be obtained from the materials to be used based on quantitative data collection in the case of the physical and mechanical properties of the reinforcement material as well as the material of the resin, in turn we proceeded through the vacuum bagging process by infusion to join both components, giving us as a result a new material already characterized, passing to the mechanical analysis stage which was carried out by the standards of TENSILE TEST_ASTM D3039, FLEXION_ASTM D7264, and IMPACTO_ASTM D52628-10, later the results obtained were analyzed by means of a mathematical analysis of minitab in which a main characterization was obtained that the material already established previously can yield favorable results through a results orientation configuration under a standardized norm that in the future will serve for the industrial sector as a reference. |
Descripción : | La importancia del descubrimiento de nuevos materiales basados en fibras naturales ayuda mucho a la contribución de propiedades muchas veces amigables con el medio ambiente, así como para la industria carrocera se efectividad al momento de realizar los accesorios. Por lo que la finalidad que tiene dicha investigación es investigar y analizar la propiedades mecánicas que se puedan obtener de los materiales a utilizar partiendo de una tomade datos cuantitativos en el caso de las propiedades físicas y mecánicas del material de refuerzo como del material de la resina, a su vez se procedió mediante el proceso vacuum bagging por infusión a unir ambos componentes dándonos como resultado un nuevo material ya caracterizado pasando a la etapa de análisis mecánico la cual se realizó mediante las normas de ENSAYO DE TRACCIÓN_ASTM D3039, FLEXION_ASTM D7264, e IMPACTO_ASTM D52628-10, posteriormente los resultados obtenidos fueron analizados mediante una análisis matemático de minitab en el cual se obtuvo una caracterización principal que el material ya establecido anteriormente puede arrojar resultados favorables mediante una configuración de orientación resultados bajo norma estandarizada que a futuro servirá para el sector industrial como referencia |
URI : | https://repositorio.uta.edu.ec/jspui/handle/123456789/36305 |
Aparece en las colecciones: | Ingeniería Mecánica |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Tesis I.M. 705 - Gavilanes Medina Brayan Eduardo.pdf | TESIS A TEXTO COMPLETO | 10,54 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.