Please use this identifier to cite or link to this item: https://repositorio.uta.edu.ec/jspui/handle/123456789/33052
Title: Correlación entre el CBR, DCP, las propiedades índice y mecánicas en los suelos granulares de la parroquia San José de Poaló del cantón Píllaro, provincia de Tungurahua
Authors: Portilla Yandún, Favio Paúl
Borja Ortiz, Carlos Alberto
Keywords: CORRELACIÓN
CBR
DCP
PROPIEDADES ÍNDICE
PROPIEDADES MECÁNICAS
SUELOS RESIDUALES
SUELOS TRANSPORTADOS
PROCTOR MODIFICADO
CONO DINÁMICO
Issue Date: Jun-2021
Publisher: Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract: The aim of this research work is to determine the existing correlations between the laboratory CBR, DCP, of the Index and Mechanical Properties, of the parish San José de Poaló, For the execution of this project, samples were taken from 12 types of soils located on the main roads of the sector. After taking samples, field and laboratory tests are carried out to determine the different properties of the analyzed soils. Once data from the different tests carried out have been obtained, the most significant correlations between index and mechanical properties are determined, taking into account that these correlations help the optimization of time and resources on site, giving a total of 22 correlations taking between two and three variables. The reliability of these correlations varies between 50.25 percent to 97.53 percent, which is considered an appropriate degree of reliability. Regarding the determination of the CBR, it shows little variation, which is considered a good relationship with minimal errors because the real value calculated by means of laboratory tests indicates the same thickness of the different layers of a flexible pavement.
Description: El presente trabajo de investigación tiene por objetivo determinar las correlaciones existentes entre el CBR de laboratorio, DCP, de las Propiedades Índice y Mecánicas, de la parroquia de San José de Poaló, para la ejecución de este proyecto se realizó la toma de muestras de 12 tipos de suelos ubicados en las vías principales del sector. Posteriormente de la toma de muestras se procede a realizar los ensayos de campo y laboratorio para determinar las diferentes propiedades de los suelos analizados. Una vez obtenido los datos de los distintos ensayos realizados se procede a determinar las correlaciones más significativas entre las propiedades índice y mecánicas, teniendo en cuenta que mediante dichas correlaciones ayude la optimización de tiempo y recursos en obra, dando así un total de 22 correlaciones tomando entre dos y tres variables. La confiabilidad de estas correlaciones varía entre el 50.25 por ciento hasta un 97.53 por ciento por lo que se considera un grado de confiabilidad bueno. Con respecto a la determinación del CBR denota poca variación por lo que se considera una buena relación con errores mínimos debido a que el valor real calculado por medio de ensayos de laboratorios indica el mismo grosor de las diferentes capas de un pavimento flexible.
URI: https://repositorio.uta.edu.ec/jspui/handle/123456789/33052
Appears in Collections:Ingeniería Civil

Files in This Item:
File Description SizeFormat 
Tesis I. C. 1483 - Borja Ortíz Carlos Alberto.pdfTESIS A TEXTO COMPLETO3,98 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.