Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
https://repositorio.uta.edu.ec/jspui/handle/123456789/29194
Titel: | Diseño y construcción de un acoplamiento mecánico del generador integrado al motor 3W-85cc para la alimentación del sistema eléctrico de los prototipos UAV en el centro de investigación y desarrollo de la Fuerza Aérea Ecuatoriana |
Autoren: | López López, Germánico Adán Manobanda Tonato, Gabriela Elizabeth |
Stichwörter: | DISEÑO Y CONSTRUCCIÓN MOTOR 3W-85cc SISTEMA ELÉCTRICO PROTOTIPOS UAV FAE CARGAS ELÉCTRICAS SERVOS FUTABA GENERADOR MOTORES BRUSHLESS RECTIFICADORES BATERÍAS DE GEL TASA DE DESCARGA TENSIÓN PESO |
Erscheinungsdatum: | 2019 |
Herausgeber: | Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica |
Zusammenfassung: | The present technical project was based on the study, design and construction of: a galvanized steel support plate, in addition to pulleys coupled to the motor shaft, which work by means of a belt transmission system, all these components are integrated to the 3w motor -85 xi, we also proceeded to the selection of the components for the power supply of the unmanned aerial vehicles of the CIDFAE, using the test bench duly implemented with aeromodelling equipment such as AC / DC converter, battery YTX9 - BS IGEL 12V, DC / DC converter, sending the signal through the Futaba r6014Hs receiver, and feeding the Futaba s3305 servos these equipment are correctly installed and controlled through a radio control managed by the corresponding technician of the institution and under a technical order, with the development of this project it was possible to generate autonomous energy with around 30 amps and 12 volts, contributing to the greater flight autonomy of the prototypes. |
Beschreibung: | El presente proyecto técnico se basó en el estudio, diseño y construcción de: una placa soporte de acero galvanizado, además de poleas acopladas al eje del motor, las cuales funcionan mediante un sistema de transmisión por correa, todos estos componentes son integrados al motor 3w-85 xi, también se procedió a la selección de los componentes para la alimentación del sistema eléctrico de los vehículos aéreos no tripulados del CIDFAE, utilizando el banco de pruebas debidamente implementado con equipos de aeromodelismo como conversor AC/ DC , batería YTX9 – BS IGEL de 12V , conversor DC/DC, enviando la señal a través del receptor Futaba r6014Hs, y alimentación de la carga de los servos Futaba s3305 estos equipos están correctamente instalados y controlados a través de un radio control manejado por el técnico correspondiente de la institución y bajo una orden técnica, con el desarrollo de este proyecto se logró generar energía autónoma con alrededor de 30 amperios y 12 voltios, contribuyendo a la mayor autonomía de vuelo de los prototipos. |
URI: | http://repositorio.uta.edu.ec/jspui/handle/123456789/29194 |
Enthalten in den Sammlungen: | Ingeniería Mecánica |
Dateien zu dieser Ressource:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
Tesis I. M. 501 - Manobanda Tonato Gabriela Elizabeth.pdf | TESIS A TEXTO COMPLETO | 3,73 MB | Adobe PDF | Öffnen/Anzeigen |
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.