Desarrollo de una aplicación basada en MATLAB para el cálculo de cimentaciones superficiales aisladas

Abstract

He was raised both parameters for the calculation and design of isolated footings obtaining the dimensions such as the base, height, camber of the plinth, as well as the maximum and minimum, area of steel necessary for your design effort. Investigated formulas according to the theme, they allowed to give solution to the various problems of isolated footings, producing 25 cases that a hospice surface pad can be subject, according to the location of the shoe on the ground, are central, walls and corner, pads which can be subject a: axial load, bending uniaxial and biaxial bending; not to mention that the isolated footings may present some degree of eccentricity, so resolved manually for further validation with the developed application. The main functions of Matlab, such as the command was investigated for, if, while, break, among others. They helped to give solution to the iterations were found during the calculation. The main objective of this work was to get to the designed graphic interface in such a way their environment is friendly with the user. During testing between the manual method and the application developed a margin of error of less than 3%, found that its handling for different types of cases of calculation is valid to arise, allowing to simplify the hours of calculation at the time of the design, saving time and money.