Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Desarrollo de un software específico para el diseño de conexiones de arriostre o viga-columna para pórticos especiales arriostrados concéntricamente, conforme a la normativa ANSI/AISC 341 -16
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-03)
    López López, Liliana Lizbeth
    ;
    Pico Núñez, María Fernanda
    ;
    Medina Robalino, Wilson Santiago
    The present research project has as purpose the codification of a specific software for bracing connections or beam-column connections design for steel special concentrically braced frames (SSCBF). It allows us to design in a quick and safe way the simple beamcolumns (bolted) connection, welded beam-column connection, double braced beam column (welded) connection, X brace-beam (welded) connection, simple beam-column (bolted) corner connection, and simple beam-column (welded) corner connection. For the design of the different connections, they were analyzed by ANSI/AISC 341-16 Standards criteria. From it the calculation equations for a design by capacity were taken. For the development of the software, we started with the manual calculation of the different connections, with this the software programming code was developed and at the same time the graphic interface for the visualization of the results was created. For the veracity of the SCBF DESIGN CONNECTION software, the results obtained by the developed software were compared with the manual method; resulting in a margin of error of less than 1.50 percent, thus verifying that the results obtained by the software are reliable.
  • Item type:Ítem,
    Manual técnico para el proceso constructivo de una edificación de hormigón armado de dos pisos
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2017)
    Pico Núñez, María Fernanda
    ;
    Cevallos Cabrera, Jorge Washington
    The purpose of this experimental work is the elaboration of technical specifications, which serve as a guide for the construction of reinforced concrete building. For the development of the project, technical visits were made to buildings in their construction phase, with the complementation of a bibliographical inquiry into books, codes and standards; to contrast the information obtained in the field, with the information obtained from technical documents. Prior to the elaboration of the technical specifications, architectural, structural and hydro sanitary and electrical plans were obtained, with which the necessary items for the construction of the dwelling were determined, which include civil works, coatings, finishes and installations. Each technical specification consists of: description, execution procedure in which the requirements are detailed before, during and after the realization of the item, applied regulations, safety to safeguard the integrity of the workers and the unit, materials, equipment and hand of work. Consequently, the unit price analysis of the item was performed with this information. The final product obtained serves as a guide that provides a concrete description of methods for the execution of the items in compliance with national and international regulations, codes and standards used within the Ecuadorian territory, for adequate control of work both in execution and for review.