Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.uta.edu.ec/jspui/handle/123456789/32149
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.advisor | Paredes Salinas, Juan Gilberto | - |
dc.contributor.author | Urquizo Vaca, Gabriel Alejandro | - |
dc.date.accessioned | 2021-02-09T21:46:25Z | - |
dc.date.available | 2021-02-09T21:46:25Z | - |
dc.date.issued | 2021-02 | - |
dc.identifier.uri | https://repositorio.uta.edu.ec/jspui/handle/123456789/32149 | - |
dc.description | La presente investigación tiene como objetivo la caracterización de un nuevo material a partir de caucho reciclado, fibra de abacá y resina, como material alternativo para aplicaciones industriales, se tomaron distintas configuraciones volumétricas del material compuesto para determinar la mejor combinación de propiedades mecánicas, se realiza ensayos a tracción, compresión, dureza y desgaste, las probetas se obtuvieron en normas de tracción NTE INEN 1165, compresión NTE INEN 889, dureza NTE INEN 887 y desgaste ISO 4649:2010. Mediante el método de diseño de experimentos (DOE) se realizó 13 configuraciones volumétricas de resina con granulo de caucho y fibra de abacá en diferentes tamaños de fibra corta y larga, con los datos se procede a extraer las probetas que fueron enviadas para los diferentes ensayos de tracción compresión, dureza y desgaste, de esta manera se obtiene el mejor comportamiento mecánico de las configuraciones realizadas de la mezcla de resina poliuretano más caucho y fibra de abacá. Con los resultados de los ensayos realizados se obtiene la mejor configuración volumétrica de fibra corta con el 10 por ciento de resina, abacá: 25 por ciento y 65 por ciento de caucho, en este compuesto la resistencia a la tracción fue de 2,08 Mpa, la resistencia a la compresión de 58,798 Mpa su dureza fue de 86 Shore A y el desgaste alcanzó el valor de 42,22 por lo que certifica que esta combinación es aceptada como material alternativo para aplicaciones industriales. | es_ES |
dc.description.abstract | The objective of this research is the characterization of a new material from recycled rubber, abaca fiber and resin, as an alternative material for industrial applications, different volumetric configurations of the composite material were taken to determine the best combination of mechanical properties, tensile, compression, hardness and wear tests were performed, the specimens were obtained in tensile standards NTE INEN 1165, compression NTE INEN 889, hardness NTE INEN 887 and wear ISO 4649:2010. Using the design of experiments (DOE) method has been made 13 volumetric configurations of resin with rubber granules and abaca fiber in different sizes of short and long fiber were made, with the data we proceeded to extract the specimens that were sent for the different tensile, compression, hardness and wear tests, thus obtaining the best mechanical behavior of the configurations made of the mixture of polyurethane resin with rubber and abaca fiber. With the results of the tests carried out, the best volumetric configuration of short fiber with 10 percent resin, abaca: 25 percent and 65 percent rubber was obtained. In this compound, the tensile strength was 2.08 Mpa, the compressive strength was 58.798 Mpa, its hardness was 86 Shore A and the wear reached a value of 42.22, which certifies that this combination is accepted as an alternative material for industrial applications. | es_ES |
dc.language.iso | spa | es_ES |
dc.publisher | Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica | es_ES |
dc.rights | openAccess | es_ES |
dc.subject | MATRIZ DE POLIURETANO | es_ES |
dc.subject | CAUCHO RECICLADO | es_ES |
dc.subject | FIBRA DE ABACÁ | es_ES |
dc.subject | MATRIZ ELASTÓMERA | es_ES |
dc.subject | MOLDEO POR PULTRUSIÓN | es_ES |
dc.subject | MOLDEO POR EXTRUSIÓN | es_ES |
dc.subject | CAUCHO ESTIRENO | es_ES |
dc.subject | CAUCHO SBR | es_ES |
dc.subject | TRANSFERENCIA DE RESINA | es_ES |
dc.title | Caracterización del comportamiento mecánico de un material compuesto a partir de matriz de poliuretano monocomponente, reforzado con gránulo de caucho reciclado y fibra de abacá como material alternativo, para aplicaciones industriales | es_ES |
dc.type | bachelorThesis | es_ES |
Aparece en las colecciones: | Ingeniería Mecánica |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Tesis I. M. 622 - Urquizo Vaca Gabriel Alejandro.pdf | TESIS A TEXTO COMPLETO | 8,66 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.