Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/37597
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorLópez Villacís, Gonzalo Eduardo-
dc.contributor.authorSánchez Borja, Sebastián Vinicio-
dc.date.accessioned2023-03-15T17:54:14Z-
dc.date.available2023-03-15T17:54:14Z-
dc.date.issued2023-03-
dc.identifier.urihttps://repositorio.uta.edu.ec/jspui/handle/123456789/37597-
dc.descriptionLa presente investigación consistió en la evaluación de la vulnerabilidad sísmica de edificaciones metálicas en la parroquia Atahualpa, sirvió para evaluar e identificar construcciones informales las cuales necesitan de un análisis más a fondo, además que sirvió para realizar una propuesta de reforzamiento a una estructura representativa en la parroquia. En primera instancia se identificó las construcciones en las que su principal componente era la estructura metálica, a partir de eso se llenaron los formularios propuestos en las normas FEMA P-154, NEC 15 y FUNVISIS, y así finalmente poder establecer el grado de vulnerabilidad de las mismas. Posteriormente se obtuvo una tabla resumen, donde se identificó los valores de vulnerabilidad, datos generales e índice de priorización de las edificaciones. Una vez seleccionada la estructura más importante en la parroquia, se realizó el diseño estructural y análisis del comportamiento sísmico, mediante el análisis modal espectral lineal, el análisis tiempo historia lineal y pushover con y sin disipadores, con lo que se propuso un reforzamiento estructural para un periodo de retorno de 475 años, mediante la utilización de disipadores viscosos.es_ES
dc.description.abstractThe present investigation consisted in the evaluation of the seismic vulnerability of metallic buildings in the town of Atahualpa, this was used to evaluate and identified informal constructions, which need to be more analyzed, also this investigation was used to do a reinforcement proposition to an important building in the zone. In the first instance all the metallic buildings were identified and starting in that place the formularies of the normative FEMA P-154, NEC 15 and FUNVISIS, and finally stablish the vulnerability grade of the buildings. Subsequently, a summary table was obtained, where the vulnerability values, general data and prioritization index of the buildings were identified. Once the most important structure in the parish was selected, the structural design and analysis of the seismic behavior was carried out, through the linear spectral modal analysis, the linear time history analysis and pushover with and without dissipators, with which a structural reinforcement was proposed for a return period of 475 years, using viscous dissipators.es_ES
dc.language.isospaes_ES
dc.publisherUniversidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicases_ES
dc.rightsopenAccesses_ES
dc.subjectANÁLISISes_ES
dc.subjectDISEÑOes_ES
dc.subjectDISIPADORESes_ES
dc.subjectEDIFICACIONESes_ES
dc.subjectESTRUCTURALes_ES
dc.subjectPRIORIZACIÓNes_ES
dc.subjectSÍSMICOes_ES
dc.subjectVULNERABILIDADes_ES
dc.titleEvaluación de la vulnerabilidad sísmica de edificaciones de estructuras metálicas en la parroquia Atahualpa, Ambato, Ecuador: Propuesta de reforzamiento estructural de una edificación representativaes_ES
dc.typemasterThesises_ES
Aparece en las colecciones: Maestría en Ingeniería Civil con Mención en Estructuras Metálicas

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Maestría E.M. 32 - Sánchez Borja Sebastian Vinicio.pdfTESIS A TEXTO COMPLETO16,3 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.