Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/29867
Título : Desarrollar un plan de mantenimiento preventivo para la maquinaria de la empresa Imprenta “Morales” de la ciudad de Ambato
Autor : Castro Miniguano, Christian Byron
Morales Criollo, Carlos Luis
Palabras clave : MANTENIMIENTO PREVENTIVO
PLAN DE MANTENIMIENTO
MANTENIMIENTO CORRECTIVO
MANTENIMIENTO PREDICTIVO
INDICADORES DE MANTENIMIENTO
TASA DE FALLOS
TASA DE REPARACIÓN
ÍNDICE DE PRIORIDAD
AMFE
Fecha de publicación : 2019
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Resumen : The importance of this project lies in the need to have adequate and specific control of the machinery of the company IMPRENTA “MORALES” which provide preventive maintenance and control, allowing to detect potential failures and defects of the machinery in the nascent stages to avoid unnecessary downtime and emergency stops failures, causing negative financial impact on the profits generated by the company. It has been made the uprising necessary information of machinery, which enables the inventory and technical data sheets which provide us with data notable from each of the existing machines for the implementation of its service, In addition was the modal analysis FMEA which enable you to determine which are the most likely elements to withstand damage and faults that will be replaced. On the other hand also analyzed times mean time between failures(TMBF), average repair time (MTTR), the failure rate (λ), operation time (TO), Reliability, Availability (D). To facilitate maintenance, the plan was developed through the support of free software.
Descripción : La importancia del presente proyecto radica en la necesidad de tener un control adecuado y concreto de la maquinaria de la empresa IMPRENTA “MORALES” el cual proporcione el control y mantenimiento preventivo, permitiendo detectar posibles fallas y defectos de la maquinaria en las etapas nacientes para evitar que los fallos produzcan paradas de emergencia y tiempos muertos innecesarios, causando impacto financiero negativo en las utilidades generadas por la empresa. Se realizó el levantamiento de información necesaria de la maquinaria, el cual permite realizar el inventario y fichas técnicas los cuales nos brindan datos notables de cada una de las máquinas existentes para la ejecución de su servicio, además se realizó el análisis modal AMFE que permite determinar cuáles son los elementos más propensos a soportar daños y averías los mismos que serán sustituidos. Por otra parte también se analizó los tiempos (TMBF) tiempo medio entre fallos, MTTR tiempo medio de reparación, (λ) la tasa de fallos, (TO) tiempo de operación, fiabilidad, disponibilidad (D). Para facilitar el mantenimiento se desarrolló el plan mediante el apoyo de un software libre.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/29867
Aparece en las colecciones: Ingeniería Mecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. M. 530 - Morales Criollo Carlos Luis.pdfTESIS A TEXTO COMPLETO3,29 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.