Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/27011
Título : Análisis del aserrín como filtro en el tratamiento de aguas residuales proveniente de la Industria de Textiles Andelas Cía. Ltda.
Autor : Arias Salazar, Daicy Paola
Sinalín Sisalema, Fernanda Maricela
Palabras clave : AGUAS RESIDUALES
ASERRÍN
TEXTILES ANDELAS
Fecha de publicación : 2018
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Resumen : This work was carried out with the negative environmental impact generated by wastewater from the textile industry, to improve its characteristics before being discharged into the sewerage system, looking for a more ecological and low cost alternative. In the Methodology, issues that lead to the adequate development of the research are addressed, which describe the productive process of the industry, its location, distribution, description of the infrastructure, implementation of the project and its operation: this was established and the population was shown , verifying the variables, with a collection of information and samples according to what is necessary. The data obtained in the development of the cycle were interpreted and tabulated, as well as the information regarding the water inlets and the waste water outlet.The results of the parameters studied are compared with other bibliographies to verify the hypotheses. Subsequently, the objectives established in the investigation are verified. With the present experimental work suggests that the sawdust for its efficiency of 44%, be studied subtly to use it, since its effectiveness varies depending on these parameters: the size of the particles, the optimum quantity, the type of sawdust that is needed for this treatment, and in this way could be used as filtering material in the treatment of wastewater from the textile industry, considering that it is good for retaining solids, oils, metals, etc. and that a natural absorbent.
Descripción : Este trabajo se realizó conociendo el impacto ambiental negativo que generan las aguas residuales de la industria textil, con el objeto de mejorar sus características antes de su vertido al alcantarillado, buscando una alternativa más ecológica y de bajo costo. En la metodología, se abordan temas que conllevan al desarrollo adecuado de la investigación, describiendo el proceso productivo de la industria, su ubicación, distribución, descripción de la infraestructura, la implantación del proyecto, y su funcionamiento: así, se estableció la población y muestra, verificando las variables, con una recolección de información y de muestras acorde con lo necesitado. Se interpretaron, y tabularon los datos obtenidos en el desarrollo del experimento, así también se recopiló la información referente a caudales de entrada del agua y salida del agua residual. Los resultados de los parámetros estudiados, son comparados con otras bibliografías para verificar las hipótesis. Posteriormente se verifican los objetivos planteados dentro de la investigación. Con el presente trabajo experimental se sugiere que el aserrín por su eficacia del 44%, sea estudiado sutilmente para utilizarlo, ya que su eficacia varía dependiendo de estos parámetros: el tamaño de las partículas, la cantidad óptima, el tipo de aserrín que se necesite para este tratamiento, y de esta manera podría ser utilizado como material filtrante en el tratamiento de aguas residuales provenientes de la industria textil, considerando que es bueno para retener sólidos, aceites, metales, etc. y que un absorbente natural.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/27011
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis 1201 - Sinalín Sisalema Fernanda Maricela.pdf6,37 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.