Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/26078
Título : Diseño y construcción de un molde de inyección del arco almohadillado, de protectores auditivos para la empresa Halley Corporación”
Autor : Carrillo Rosero, Carlos Mauricio
Casañas Bonifaz, David Ignacio
Palabras clave : POLÍMEROS
SISTEMAS DE MOLDEO
MOLDES
ACERO P20
MOLDE DE INYECCIÓN
SISTEMA DE REFRIGERACIÓN
SISTEMAS CAD/CAM y CNC
VARILLAS EXPULSORAS
PLACAS DE EXPULSIÓN
Fecha de publicación : 2017
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Resumen : The object of the present work is satisfy the necessity of the company Halley Corporation, with the end of do the arc pad in series in the same time with certain dimensions, for this reason the author of the work have requirements of the company for elaborate the mold, like the material that will be used for the building, and the plastic that will be used for inject the object that need the company. For this reason, the project was started with the modeling of the arc pad in a specialized software, after that we got the nucleus and cavity of the object to inject. Then with the help of the software we analyze the demoulding angles and the dimensions that need the arc pad. For other part, the calculations were obtained in based of requirements of the company like the material that will be injected, in this case the material is ABS, and the material that will used for the building of the mold Among the calculations that were obtained are the feeding, refrigeration and expulsion systems for asegurate the correct operation of the mold. For finish the project we realized machining of the arc pad with a CNC milling machine, also it was built the different elements that make up the mold. The tests of the construction of the mold were realized with the help of an injecting machine, in this moment we look that the selection of the systems were correct, because the mold had an adequate efficiency in the injection process.
Descripción : El objetivo del presente trabajo es satisfacer la necesidad de la empresa Halley Corporación, con el fin de reproducir el arco almohadillado en serie con dimensiones determinadas, para lo cual se basa en requerimientos de la misma como son: el material con el que va ser construido el molde de inyección y el material con el que va ser fabricado la pieza requerida. Para lo cual se partió del modelado del arco almohadillado en un software especializado, posteriormente se extrajo el núcleo y cavidad del mismo. A continuación se analizó sus ángulos de salida y las dimensiones requeridas. En cuanto a los cálculos se partió de requerimientos de la empresa como la materia a ser inyectado en este caso ABS y el material con que va a ser construido. Como siguiente paso se calculó los sistemas de alimentación, refrigeración y expulsión para asegurar el adecuado funcionamiento del molde. Finalmente se calculó el factor de seguridad del sistema de sujeción del mismo. Para concluir con el proyecto se realizó el mecanizado del arco almohadillado en una fresadora CNC con la que cuenta la empresa, además de construir los diferentes elementos que conforman el molde y su montaje para posteriores pruebas. Las pruebas de la construcción del molde se lo realizo en una máquina inyectora con la que cuenta la empresa, afirmando que la selección de los sistemas mencionados fueron los adecuados, brindando así una eficiencia óptima del molde.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/26078
Aparece en las colecciones: Ingeniería Mecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I.M. 391 - Casañas Bonifaz David Ignacio.pdfTESIS A TEXTO COMPLETO4,39 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.