Diseño y construcción de un sistema de alta presión para la limpieza de bombas de inyección mediante desengrasante biodegradable en el laboratorio de bombas de inyección Ambadiesel
No Thumbnail Available
Date
2017
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
The present project was developed in the city of Ambato in the company
"AMBADIESEL INJECTION PUMP LABORATORY", the interest of the company
in the construction of the laying machine in the need to optimize times and reduce
costs in the process Cleaning Equipment Parts
For the design of the machine the various parameters are considered as the amount of
the diameter-gasoline mixture is concerned in the cleaning and weight of different
injection pumps, as well as pressure on any such injection pumps. This led to the
design of the structure that blows the injection pumps, to continue with the selection
of the pump that moves the fluid from the tank to the sprinklers that clean the injection
pump. The sizing and checking of the strength of the structure was done by finite
element analysis using the Solidworks software. The behavior of the fluid as well as
the structure (velocities, flow rates) was performed using Solidworks software. The
construction and installation of the machine are carried out at the company's premises
with the economic resources, materials and human resources thereof.
Description
El presente proyecto se desarrolló en la ciudad de Ambato en la empresa
“LABORATORIO DE BOMBAS DE INYECCIÓN AMBADIESEL”, el interés de la
empresa por la construcción de esta máquina radica en la necesidad de optimizar
tiempos y reducción de costos en el proceso de limpieza de partes.
Para el diseño de la máquina se considera diferentes parámetros como son la cantidad
de mezcla diésel-gasolina se ocupa en la limpieza y el peso de diferentes bombas de
inyección, así como la presión a la cual se lava dichas bombas de inyección. Con lo
cual se procedió al diseño de la estructura que soporta las bombas de inyección, para
continuar con la selección de la bomba que moverá el fluido del depósito hacia los
aspersores que limpiaran la bomba de inyección. El dimensionamiento y
comprobación de resistencia de la estructura se realizó mediante un análisis por
elementos finitos utilizando el software Solidworks. El comportamiento del fluido al
igual que la estructura (velocidades, caudales) se realizó mediante el software
Solidworks. La construcción y montaje de la máquina se lo realizó en las instalaciones
de la empresa utilizando los recursos económicos, materiales y humanos de la misma.
Keywords
SISTEMA DE ALTA PRESIÓN, BOMBAS DE INYECCIÓN, SISTEMA HIDRÁULICO, FILTRACIÓN, CABINA DE LIMPIEZA