Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/30028
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorLópez Arboleda, Alex Gustavo-
dc.contributor.authorRobalino Sánchez, Edwin Fernando-
dc.date.accessioned2019-08-04T14:23:56Z-
dc.date.available2019-08-04T14:23:56Z-
dc.date.issued2019-
dc.identifier.urihttp://repositorio.uta.edu.ec/jspui/handle/123456789/30028-
dc.descriptionLa presente investigación muestra el análisis y resultados del estudio de la variación de la temperatura y acondicionamiento acústico de muestras de adobe. El barro para la fabricación de los adobes artesanales fue extraído zonas inmersas en la provincia de Tungurahua, de la parroquia de Pilahuin ubicado al suroeste de Ambato, y de la parroquia Pilisurco ubicado al noroeste del cantón Ambato. En cuanto se refiere al proceso de fabricación de los bloques, se estableció realizarlo en base a los parámetros descritos en la norma peruana E.080 - Diseño y Construcción con Tierra Reforzada. Previamente se realizó el estudio de los parámetros físicos, con el fin de mantener un buen contexto de su composición, además de establecer una evaluación de calidad del suelo para regirse a la norma mencionada. Se estableció realizar el estudio para 4 combinaciones, el barro más un porcentaje de plástico triturado PET en función del volumen, donde se precisó colocar en orden de: 0%, 5%, 10% y 15%. El análisis realizado para ensayos de temperatura y sonido, se basa en los procedimientos descritos en las normas: NCh. 851 of 1983 [26], NCh. 849 of 1987 [42] Aislación Térmica, y NCh. 2865 of 2004 Acústica [25], donde se estableció el nivel de aislamiento acústico y variación de temperatura, en base a la construcción de una cámara hermética con estructura metálica, cartones de yeso y landa con fibra de vidrio, en ella se colocaron 16 muestras de adobe en forma de panel por cada combinación especificada. Los resultados referidos al nivel de aislación acústica se XXI mantuvieron óptimos con el bloque más un 15% de PET, y el mayor nivel de aislación térmica se produjo con el 5% de material PET. Finalmente se realizó una comparación de la resistencia a compresión de los bloques de adobe elaborados, y la resistencia mínima aceptada por la norma peruana E.080 - Diseño y Construcción con Tierra Reforzada. Se realizaron 6 muestras por cada combinación, donde se establece que con el 0% y 5% de material PET, alcanza una resistencia superior a 10,2 kg/cm2, mientras que al incrementar a un 10% y 15% de PET, la resistencia disminuye.es_ES
dc.description.abstractThe present investigation shows the analysis and results of the study of the variation of the temperature and acoustic conditioning of samples of adobe. The mud for the manufacture of the artisan adobes was extracted immersed areas in the province of Tungurahua, the parish of Pilahuin located southwest of Ambato, and the parish Pilisurco located northwest of the canton Ambato. As regards the manufacturing process of the blocks, it was established to perform it based on the parameters described in the Peruvian standard E.080 - Design and Construction with Reinforced Earth. Previously, the study of physical parameters was carried out, in order to maintain a good context of its composition, in addition to establishing an evaluation of soil quality to abide by the aforementioned standard. It was established to carry out the study for 4 combinations, the clay plus a percentage of plastic PET crushed depending on the volume, where it was necessary to place in order of: 0%, 5%, 10% and 15%. The analysis performed for temperature and sound tests is based on the procedures described in the standards: NCh. 851 of 1983, NCh. 849 of 1987 Thermal Insulation, and NCh. 2865 of 2004 Acoustics, where the level of acoustic insulation and variation of temperature was established, based on the construction of a hermetic chamber with metal structure, gypsum boards and wool with fiberglass, in which 16 samples of adobe were placed in Panel form for each specified combination. The results referring to the level of acoustic insulation remained optimal with the block plus 15% PET, and the highest level of thermal insulation was produced with 5% PET material. Finally, a comparison was made of the compressive strength of the adobe blocks made, and the minimum resistance accepted by the Peruvian standard E.080 - Design and Construction with Reinforced Earth. Six samples were made for each combination, where it is established that with 0% and 5% of PET material, it reaches a resistance superior to 10,2 kg/cm2, while when increasing to 10% and 15% of PET, the resistance decreases.es_ES
dc.language.isospaes_ES
dc.publisherUniversidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civiles_ES
dc.rightsopenAccesses_ES
dc.subjectBOTELLAS PLÁSTICAS PETes_ES
dc.subjectBLOQUES DE ADOBEes_ES
dc.subjectACONDICIONAMIENTO ACÚSTICOes_ES
dc.subjectVARIACIÓN DE TEMPERATURAes_ES
dc.subjectADICIÓN DE BOTELLASes_ES
dc.subjectANÁLISIS DE SUELOes_ES
dc.subjectPLÁSTICO TRITURADO PETes_ES
dc.subjectMAMPUESTOSes_ES
dc.subjectMUROS DE ADOBEes_ES
dc.subjectENSAYO TÉRMICOes_ES
dc.subjectENSAYO ACÚSTICOes_ES
dc.subjectENSAYO A COMPRESIÓNes_ES
dc.titleLa adición de botellas plásticas PET en la elaboración de bloques de adobe para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato provincia de Tungurahuaes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. C. 1346 - Robalino Sánchez Edwin Fernando.pdfTESIS A TEXTO COMPLETO4,22 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.