Please use this identifier to cite or link to this item: https://repositorio.uta.edu.ec/jspui/handle/123456789/29823
Title: Factores de riesgos mecánicos y su influencia en los accidentes de trabajo de los operadores de extractoras de aceite de palma africana
Authors: Cabrera Acosta, Andrés Gonzalo
Barreno Villacís, Angélica María
Keywords: GESTIÓN DE RIESGOS
ACCIDENTES LABORALES
CONDICIONES DE TRABAJO
MÉTODO WILLIAM FINE
Issue Date: 2019
Publisher: Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Seguridad e Higiene Industrial y Ambiental
Abstract: The present investigation was based on the evaluation of the mechanical risk factors and their influence on the work accidents of the operators of African palm oil extractors for which the African Palm Oil Extractor was taken as a reference case study. "La Joya", "Extrajoya". Among the risk factors of mechanical origin, the following were identified: blows with moving or immobile objects, falls at the same or at a different level, entrapment between objects, thermal contact, falling of detached objects, cuts and lacerations. The measurement and evaluation of the mechanical risks existing in case of study was carried out using the William FINE method, as a result of the analysis it was determined that there is a High Risk Degree, the same one that will not vary by job and process. At the same time, a review of the accident history was carried out, established by the method NTP 236 Work accidents: statistical control, reaching to determine that the accident frequency index is equivalent to 40.6, based on the relationship that exists between the number of accidents, the loss of working hours and the severity of injuries. These accidents have caused a total permanent disability in the victims, according to this analysis it is necessary to take corrective actions in the Extractor "La Joya". As an alternative solution to the problem, the risk control design is established at the source, the medium and the receiver.
Description: La presente investigación se basó en la evaluación de los factores de riesgo mecánico y su influencia en los accidentes de trabajo de los operadores de extractoras de aceite de palma africana para lo cual se tomó como caso de estudio referencial a la Extractora de Aceite de Palma Africana “La Joya”, “Extrajoya”. Entre los factores de riesgo de origen mecánico se identificó los siguientes: golpes con objetos móviles o inmóviles, caídas al mismo o a diferente nivel, atrapamiento entre objetos, contacto térmico, caída de objetos desprendidos, cortes y laceraciones. Se efectúo la medición y evaluación de los riesgos mecánicos existentes en caso de estudio mediante el método de William FINE, como resultado del análisis se determinó que existe un Grado de Riesgo Alto, el mismo que no variara por puesto de trabajo y proceso. Al mismo tiempo, se realizó la revisión del historial de accidentabilidad, establecido por el método NTP 236 Accidentes de trabajo: control estadístico, llegándose a determinar que el índice de frecuencia de accidentes laborales equivale a 40.6, basados en la relación que existe entre el número de accidentes, la pérdida de la jornada laboral y de gravedad de las lesiones. Estos accidentes han provocado una incapacidad permanente total en las víctimas, según este análisis es necesario tomar acciones correctivas en la Extractora “La Joya”. Como una alternativa de solución a la problemática se establece el diseño del control del riesgo en la fuente, el medio y el receptor.
URI: http://repositorio.uta.edu.ec/jspui/handle/123456789/29823
Appears in Collections:Maestria en Seguridad e Higiene Industrial y Ambiental

Files in This Item:
File Description SizeFormat 
Tesis_t1582mshi.pdf4,59 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.