Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: https://repositorio.uta.edu.ec/jspui/handle/123456789/30651
Titel: Diseño y construcción de un prototipo de quemador de GLP de Baja potencia para secado agroindustrial para uso en los Laboratorios de la FICM
Autoren: Cabrera Anda, Santiago Paúl
Jarrín López, Alex Gabriel
Bayas Pasto, José Luis
Stichwörter: SECADO AGROINDUSTRIAL
CILINDRO DE FUEGO
QUEMADOR DE GLP
SECADO
TERMOGRAFÍA
INYECTORES
CÁMARA TERMOGRÁFICA
QUEMADOR BUNSEN
Erscheinungsdatum: 2020
Herausgeber: Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Zusammenfassung: The present technical project is based on the design, construction and functional tests of a LPG burner where information on types of burners, material characteristics was acquired, selecting the best alternative through weightings with criteria such as: cost, performance, characteristic of flame, ease of transfer and primary air with which the fuel-oxidizing mixture will be made. The main elements such as the fire cylinder, injectors and the structure that will support the cylinder and components were designed, as well as thermal insulators such as glass wool, ceramic fiber and alumina ceramic tube. In order to obtain temperature data in the fire cylinder, technological equipment was used such as: pyrometer, anemometer, thermal imager and LPG consumption meter, in addition to thermal calculations thermal expansion, combustion and losses caused by heat transfer were determined. With the use of a software, combined losses by convection and radiation were established in the Sankey diagram (5.7 porcent) , losses due to solid burns (6 percent), losses from the rear of the cylinder (7.6 percent) were established in the Sankey diagram) and unquantified losses (10 percent) obtaining a useful heat of 7.8 kWh and an efficiency of 70.7 percent of useful hot air flow. Finally, with the help of a software it was possible to analyze the shape and color of the burner flame reaching an optimum operating range with a blue flame length between 11.8 to 15.2 cm and a temperature of 487 degrees Celsius, showing the minimum presence of unburned which benefits the efficiency and calorific value of the LPG burner.
Beschreibung: El presente proyecto técnico está basado en el diseño, construcción y pruebas de funcionamiento de un quemador de GLP donde se adquirió información de tipos de quemadores, características de los materiales, seleccionando la mejor alternativa mediante ponderaciones con criterios como: costo, rendimiento, característica de llama, facilidad de trasladado y aire primario con que se realizará la mezcla combustible-comburente. Se diseñó los elementos principales como el cilindro de fuego, inyectores y la estructura que soportará el cilindro y componentes, además se implementó aislantes térmicos como: lana de vidrio, fibra de cerámica y tubo de cerámica alúmina. Para la obtención de datos de temperaturas en el cilindro de fuego se utilizó equipos tecnológicos como: pirómetro, anemómetro, cámara termográfica y medidor de consumo de GLP, además mediante cálculos térmicos se determinó dilatación térmica, combustión y pérdidas causadas por transferencia de calor. Con la utilización de un software se estableció en el diagrama de Sankey pérdidas combinadas por convección y radiación (5.7 por ciento), pérdidas por inquemados sólidos (6 por ciento), pérdidas por la parte posterior del cilindro (7.6 por ciento) y pérdidas no cuantificadas (10 por ciento) obteniendo un calor útil de 7.8 kWh y una eficiencia de 70.7 por ciento de flujo de aire caliente útil. Finalmente, con la ayuda de un software se pudo analizar la forma y color de llama del quemador alcanzando un rango de funcionamiento óptimo con una longitud de llama azul entre 11.8 a 15.2 cm y una temperatura de 487 grados centígrados, evidenciando la presencia mínima de inquemados lo que beneficia la eficiencia y poder calorífico del quemador de GLP.
URI: https://repositorio.uta.edu.ec/jspui/handle/123456789/30651
Enthalten in den Sammlungen:Ingeniería Mecánica

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
Tesis I. M. 572 - Jarrín López Alex Gabriel.pdfTESIS A TEXTO COMPLETO5,7 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.