Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/30024
Título : La adición de botellas plásticas PET en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua
Autor : Guevara Robalino, Jorge Javier
Paguay Córdova, Edison Andrés
Palabras clave : BOTELLAS PLÁSTICAS PET
BLOQUES ALIVIANADOS
ACONDICIONAMIENTO ACÚSTICO
VARIACIÓN DE TEMPERATURA
VIVIENDAS UNIFAMILIARES
ELABORACIÓN DE BLOQUES
AGREGADO FINO
AGREGADO GRUESO
GRANULOMETRÍA
TRANSMITANCIA TÉRMICA
CONDUCTIVIDAD TÉRMICA
CONFORT TÉRMICO
Fecha de publicación : 2019
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Resumen : The present investigation has been carried out with the purpose of knowing the influence that the blocks of work with the plastic have with the temperature and the acoustic conditioning in the middle of a hermetic chamber; for what was done and a dosage was elaborated applying the Optima Density Method for the elaboration of Type B blocks according to the NTE INEN 3066 standard, which served as the basis to elaborate the other dosages with the addition of 15, 25, 50 and 75% of PET plastic replacing the coarse aggregate (Chasqui) and later elaborated type walls of 1.00 mx 0.70 m. As it increases the percentage addition of PET material, the resistance to compression decreases by 4, 12, 30 and 50%, however it is still superior to the traditional artisan block; On the other hand, the more the PET material is added, the better the thermal and acoustic variation in relation to a traditional block and block wall, indicating that the correct addition of the PET material has a significant influence on the temperature control and sound insulation in the environments of a dwelling by not allowing the passage of heat and noise from one environment to another; being the best specimen resulting from the thermal tests the wall made with block with 50% PET and the block wall with 75% PET for the acoustic test.
Descripción : La presente investigación se realizó con la finalidad de conocer la influencia que tiene los bloques alivianados de hormigón con plástico PET en la variación de temperatura y acondicionamiento acústicos por medio de una cámara hermética; para lo cual se elaboró una dosificación aplicando el Método de Densidades Optimas para la elaboración de bloques Tipo B según la norma NTE INEN 3066, que sirvió de base para elaborar las demás dosificaciones con adición de 15, 25, 50 y 75% de plástico PET sustituyendo al agregado grueso (Chasqui) y posteriormente elaborarse paredes tipo de 1,00 m x 0,70 m. Conforme aumenta la adición de porcentaje de material PET, la resistencia a compresión disminuye en 4, 12, 30 y 50%, sin embargo sigue siendo superior al bloque artesanal tradicional; en cambio mientras más se adicione el material PET, su variación térmica y acústica mejora en relación a una pared de bloque tradicional y de bloque normado, indicando que la adición correcta del material PET influye significativamente en el control de la temperatura y aislamiento acústico en los ambientes de una vivienda al no permitir el paso del calor y ruido de un ambiente a otro; siendo el mejor espécimen resultante de los ensayos térmicos la pared elaborada con bloque con 50% de PET y la pared de bloques con 75% de PET para el ensayo acústico.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/30024
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. C. 1342 - Paguay Córdova Edison Andrés.pdfTESIS A TEXTO COMPLETO9,01 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.