Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/29586
Título : Estudio del peligro sísmico determinista para las estructuras del cantón Ambato sector La Floresta ubicado en la avenida Atahualpa, avenida Victor Hugo, Antonio Clavijo
Autor : Navarro Peñaherrera, Carlos Patricio
Carrillo Pérez, Lenin Santiago
Palabras clave : PELIGRO SÍSMICO
TECTÓNICA DE PLACAS
PREDICCIÓN DE MOVIMIENTO
MOVIMIENTO DE SUELO
Fecha de publicación : 2019
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Resumen : In the present research work, the fundamental period of vibration was calculated for three buildings of the La Floresta sector of the city of Ambato, which corresponds to an acceleration based on the gravity Sa (g), taken from the specific deterministic spectrum, for compare it with the acceleration spectrum of the NEC 2015. To determine the deterministic spectrum the following steps were followed: Identify the tectonic regime at the analysis site, select the geological faults with greater length and closer to the site. By means of the standard penetration test (SPT), the average shear wave velocity VS30 was calculated. The moment magnitude was calculated for each of the faults selected using the Wells and Coppersmith methodology, using parameters such as distance to the epicenter, hypocenter and focal depth. By means of the Soil Motion Prediction Equations (GMPEs), acceleration spectra is obtained and by means of an envelope of maximum accelerations, the deterministic spectrum is obtained, which is compared with the response spectrum of the NEC 2015.
Descripción : En el presente trabajo de investigación se calculó el período fundamental de vibración para tres edificaciones tipo del sector la Floresta de la ciudad de Ambato, lo que corresponde a una aceleración en función de la gravedad Sa (g), tomada del espectro especifico determinista, para compararlo con el espectro de aceleración de la NEC 2015. Para determinar el espectro determinista se siguieron los siguientes pasos: Identificar el régimen tectónico en el sitio de análisis, seleccionar las fallas geológicas con mayor longitud y más cercanas al sitio. Mediante el ensayo de penetración estándar (SPT) se calculó la velocidad media de onda cortante VS30. Se calculó la magnitud de momento para cada una de las fallas seleccionadas utilizando la metodología de Wells y Coppersmith, utilizando parámetros como la distancia al epicentro, hipocentro y profundidad focal. Por medio de las Ecuaciones de predicción de movimiento del suelo (GMPEs) se obtiene espectros de aceleración y mediante una envolvente de aceleraciones máximas se obtiene el espectro determinista, el cual se compara con el espectro de respuesta de la NEC 2015.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/29586
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. C. 1312 - Carrillo Pérez Lenín Santiago.pdfTESIS A TEXTO COMPLETO3,62 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.