Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/28620
Título : Dureza, resistencia a la tracción y desgaste en el material sinterizado aluminio 1060 con BABBIT ASTM B 23 ALLOY 2 combinado por aleación mecánica
Autor : López Villacís, Gonzalo Eduardo
Gavilanes Jiménez, Daniel Alfonso
Palabras clave : METALES ANTIFRICCIÓN
ALUMINIO 1060
BABBIT
ASTM B 23 ALLOY 2
ALEACIÓN MECÁNICA
METALURGIA DE POLVOS
ENSAYO DE TRACCIÓN
ENSAYO DE DUREZA
ENSAYO DE DESGASTE
Fecha de publicación : 2018
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Resumen : Electrical cables were collected from the sector of Ambato to obtain the material Aluminum 1060, which was proceeded to grind in the ball mill, as well as Babbit ASTM B 23 Alloy 2 to obtain the powder with a particle size of 45μm - 63μm, which took a duration of 10 hours, taking into account that the area where the crushing was performed is free of impurities and contaminants, to achieve the purity of each case of Aluminum 1060 with Babbit ASTM b23 alloy 2 studied, which have a volumetric fraction (Case 90- 10 = 90% Aluminum 1060 with 10% Babbit ASTM B 23 Alloy 2, Case 80-20 = 80% Aluminum 1060 with 20% Babbit ASTM B 23 Alloy 2, Case 70-30 = 70% Aluminum 1060 with 30% Babbit ASTM B 23 Alloy 2). The compaction of each case was carried out by the cold pressing method with a compaction pressure of 270 MPa, which reached a temperature of 660ºC in the sintering process. In each case, he was exposed to tensile, wear and hardness tests under the corresponding ASTM E 8, ASTM E 10, ASTM G105 standards. The tests show that of the three cases the material of Case 90-10 has the best mechanical properties but the mechanical alloy combination does not improve the wear resistance with respect to the Babbit ASTM B 23 Alloy 2.
Descripción : Se recolectó cables de tendido eléctrico del sector de Ambato para la obtención del material Aluminio 1060, el cual se procedió a moler en el molino de bolas, así como Babbit ASTM b 23 alloy 2 para la obtención del polvo con un tamaño de partículas de 45μm – 63μm , lo cual tomó una duración de 10 horas, tomando en cuenta que el área donde se realizó la trituración se encuentre libre de impurezas y agentes contaminantes, para lograr la pureza de cada caso de Aluminio 1060 con Babbit ASTM b23 alloy 2 estudiado, los cuales tienen una fracción volumetría (Caso 90-10 = 90% Aluminio 1060 con 10% Babbit ASTM B 23 alloy 2; Caso 80-20 = 80% Aluminio 1060 con 20% Babbit ASTM B 23 alloy 2; Caso 70-30 = 70% Aluminio 1060 con 30% Babbit ASTM B 23 alloy 2). La compactación de cada caso se realizó por el método de prensado en frío con una presión de compactación de 270 MPa que en el proceso de sinterización se alcanzó una temperatura de 660ºC. A cada caso se le expuso a realizar ensayos de tracción, desgaste y dureza bajo las normas ASTM E 8, ASTM E 10, ASTM G105 correspondientes. Los ensayos demuestran que de los tres casos el material del Caso 90-10 tiene las mejores propiedades mecánicas pero la combinación por aleación mecánica no mejora la resistencia al desgaste con respecto al Babbit ASTM B 23.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/28620
Aparece en las colecciones: Ingeniería Mecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I. M. 479 - Gavilánez Jiménez Daniel Alfonso.pdfTESIS A TEXTO COMPLETO4,63 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.