Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/26317
Título : Estudio biomecánico en el puesto de lavado de botellas de la industria ILA.S.A y su incidencia en las condiciones laborales de los trabajadores
Autor : Córdova Suárez, Manolo Alexander
Barreno Flores, Charles Fabián
Palabras clave : LAVADO DE BOTELLAS
ESTUDIO BIOMECÁNICO
RIESGO ERGONÓMICO
RIESGOS LABORALES
CONDICIONES DE TRABAJO
SEGURIDAD INDUSTRIAL
SEGURIDAD OCUPACIONAL
SEGURIDAD EN EQUIPOS
OCRA
REBA
Fecha de publicación : 2017
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Diseño Mecánico
Resumen : The present research topic has been developed under the following parameters: Chapter I: Emphasis is given to the study of the biomechanical ergonomic risk factor in the glass bottle washing station as a general objective. Chapter II describes the approaches chosen for research being the qualitative - quantitative and hypothesized: the biomechanical ergonomic risk factor in the bottle washing station of the industry ILA.S.A affects the working conditions of workers. Chapter III: It establishes the operationalization of variables of index OCRA, REBA and the working conditions of the workers. Chapter IV: presents an analysis and interpretation of results of the OCRA index obtaining a maximum of 39 and by the method REBA check unacceptable working conditions. Chapter V: conclusions and recommendations based on general and specific objectives. Chapter VI: the proposal proposes the "implementation of a program of prevention of the ergonomic biomechanical risk factor to improve the working conditions of the bottle washing station of the industry ILA.SA" which will reduce the high indexes that present the workers on the postures and movements inadequate according to criteria of industrial safety and mechanical knowledge.
Descripción : El presente tema de investigación ha sido desarrollada bajo los siguientes parámetros: Capítulo I: hace énfasis al estudio del factor de riesgo ergonómico biomecánico en el puesto de lavado de botellas de vidrio como objetivo general. Capítulo II: describe los enfoques escogidos para la investigación siendo el cualitativo – cuantitativo y se plantea como hipótesis: el factor de riesgo ergonómico biomecánico en el puesto de lavado de botellas de la industria ILA.S.A incide en las condiciones laborales de los trabajadores. Capítulo III: Se establece la operacionalización de variables de índice OCRA, REBA y las condiciones laborales de los trabajadores. Capítulo IV: presenta un análisis e interpretación de resultados del índice OCRA obteniendo un máximo de 39 y por del método REBA se comprueban condiciones laborales no aceptables. Capítulo V: conclusiones y recomendaciones basadas en los objetivos generales y específicos. Capítulo VI: se determina la propuesta en la que se sugiere la “implementación de un programa de prevención del factor de riesgo ergonómico biomecánico para mejorar las condiciones laborales del puesto de lavado de botellas de la industria ILA.S.A” El cual reducirá los altos índices que presentan los trabajadores sobre las posturas y movimientos inadecuados según criterios de seguridad industrial y conocimientos mecánicos.
URI : http://repositorio.uta.edu.ec/jspui/handle/123456789/26317
Aparece en las colecciones: Maestría en Diseño Mecánico

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Maestría D.M. 23 - Barreno Flores Charles Fabián.pdfTESIS A TEXTO COMPLETO7,05 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.