Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/36496
Título : Ampliación y rectificación del trazado de la vía Pitágoras, parroquia Picaihua
Autor : López Arboleda, Alex Gustavo
Morales Quezada, Jhonnatan Paúl
Fecha de publicación : sep-2022
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Resumen : Due to the fact that the current effective width of the Vía Pitágoras does not satisfy the vehicular demand of the sector and due to the lack of road infrastructure, the present technical project in the Province of Tungurahua is proposed, carrying out the road layout and rectification of the axis of the road to its enlargement.The project was carried out under the regulations of the Ministry of Public Works (MOP-2003), today (MTOP), began with the topographical survey, where existing elements and their topography were identified, later the Average Annual Daily Traffic (TPDA) was determined. , through a manual count and in this way real data was obtained in order to provide an optimal geometric solution, design speeds and safe circulation.The data obtained in the territory were processed and analyzed in accordance with the regulations that govern road design and the parameters required by the MTOP, in such a way that both the horizontal design, vertical design, signage design and soil study comply with the impositions of the competent entities.Through the road design, it was possible to quantify the volumes of masses for cutting and filling, as well as finding the feasible road axis so that the consolidated constructions are not affected at the time of expansion, in the same way through the study of soils it was achieved identify that the terrain is optimal for the road and that it provides security to the proposed road infrastructure.
Descripción : Debido a que el ancho efectivo actual de la Vía Pitágoras no satisface la demanda vehicular del sector y ante la carencia de infraestructura vial se plantea, el presente proyecto técnico en la Provincia de Tungurahua, realizando el trazado vial y rectificación del eje de la vía para su ampliación. El proyecto se realizó bajo la normativa del Ministerio de Obras Públicas (MOP-2003), hoy (MTOP), se inició con el levantamiento topográfico, donde se identificaron elementos existentes y su topografía, posteriormente se determinó el Tráfico Promedio Diario Anual (TPDA), a través de un conteo manual y de esta forma se obtuvo datos reales para poder brindar una óptima solución geométrica, velocidades de diseño y una segura circulación. Los datos obtenidos en territorio fueron procesados y analizados de acuerdo a la normativa que rige el diseño vial y a los parámetros exigidos por el MTOP, de tal forma que tanto el diseño horizontal, diseño vertical, diseño de señalética y estudio de suelos cumplan con las imposiciones de las entidades competentes. Mediante el diseño vial se pudo realizar la cuantificación de volúmenes de masas para corte y relleno, así como también encontrar el eje vial factible para que las construcciones consolidadas no sufran afectaciones al momento de la ampliación, de igual forma mediante el estudio de suelos se logró identificar que el terreno es óptimo para la carretera y que brinda seguridad a la infraestructura vial propuesta.
URI : https://repositorio.uta.edu.ec/jspui/handle/123456789/36496
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis I.C. 1655 - Morales Quezada Jhonnatan Paúl.pdfTESIS A TEXTO COMPLETO24,62 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.