Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: https://repositorio.uta.edu.ec/jspui/handle/123456789/29873
Titel: Influencia de la mampostería de relleno en el comportamiento de un pórtico de estructura metálica sometido a carga lateral
Autoren: Medina Robalino, Christian David
Castro Falcón, Christian Santiago
Stichwörter: MAMPOSTERIA
PÓRTICO DE ESTRUCTURA
RÓTULAS PLÁSTICAS
MODOS DE FALLA
PUNTAL EQUIVALENTE
COLUMNAS
RÍGIDEZ DEL PÓRTICO
COLUMNAS
VIGAS
ACERO
Erscheinungsdatum: 2019
Herausgeber: Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Zusammenfassung: In this project the behavior of a steel frame subjected to lateral forces was analyzed and a comparative table was established with the same frame but filled with masonry, the mathematical representation established by FEMA was used for the analysis of the structural behavior. The frame to be analyzed was established, modeling was carried out for the finite element program ETABS, after the analysis called "Pushover" was carried out in order to analyze its behavior under lateral forces, the rigidity of the frame was established, maximum lateral load, maximum deformation of the frame, element that absorbs the highest value of shear and mechanism of failure of the frame. 63 frames models were established with different masonry representations that caused a change in structural behavior when subjected to the same Pushover analysis. The results showed a marked difference between the analysis without masonry and the one that had a masonry representation, pathologies and structural behaviors not expected in the previous analysis were visualized, reason why this study concluded that in order to analyze with greater fidelity the behavior of structures it is indispensable the representation of the masonry or a reengineering of the constructive system.
Beschreibung: En el presente proyecto se analizó el comportamiento de un pórtico de acero sometido a carga lateral y se estableció un cuadro comparativo con el mismo pórtico, pero rellenado con mampostería, se utilizó la representación matemática establecida por FEMA para el análisis del comportamiento estructural. Se estableció el pórtico a someterse a carga lateral, se realizó la modelación en el programa de elementos finitos ETABS, luego de lo cual se realizó el análisis llamado “Pushover” para interpretar su comportamiento bajo cargas laterales, se estableció la rigidez del pórtico, carga lateral máxima, deformación máxima del pórtico, elemento que absorbe el mayor valor de cortante y mecanismo de falla del pórtico. Se estudió 63 modelos de pórticos con diferentes representaciones de mampostería que ocasionaron un cambio en el comportamiento estructural al someterse al mismo análisis Pushover. Los resultados mostraron una marcada diferencia entre el análisis sin mampostería y el que tenía una representación de mampostería, se visualizó patologías y comportamientos estructurales no esperados en el análisis previo, por lo que este estudio concluyó que para poder analizar con mayor fidelidad el comportamiento de una estructura es indispensable la representación de la mampostería o una reingeniería del sistema constructivo.
URI: http://repositorio.uta.edu.ec/jspui/handle/123456789/29873
Enthalten in den Sammlungen:Ingeniería Civil

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
Tesis I. C. 1328 - Castro Falcón Christian Santiago.pdfTESIS A TEXTO COMPLETO9,37 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.